Jump to content
SAU Community

Recommended Posts

id get an adjustable bench so you can do incline and or decline.

dips are a good idea as well. would also be interested to see their pulley system as it could be worth a look at.

quality and price i dont know about.

I would be inclined not to listen to what the side of a protein container says about serving sizes...

of course they are goin to say "take 3 scoops" 3 times a day. They are trying to sell the crap.

figure out how much protein u need a day, usually 1 gram for every pound of body weight (kg x2.2) then use the protein to fill in the gaps between meals, thats why its a "supplement"

Theres no use having a 100 grams of protein in one hit, it needs to spread out through the day

I would be inclined not to listen to what the side of a protein container says about serving sizes...

of course they are goin to say "take 3 scoops" 3 times a day. They are trying to sell the crap.

figure out how much protein u need a day, usually 1 gram for every pound of body weight (kg x2.2) then use the protein to fill in the gaps between meals, thats why its a "supplement"

Theres no use having a 100 grams of protein in one hit, it needs to spread out through the day

Good point. As with any information you have to consider the source!

I've found 2 scoops of Torrent is enough for me, not the 3 prescribed, especially as I often take Vitargo during the session, so that'd be way too many carbs when taken together.

god damned OS trips... just got back from Thailand for a friends wedding... 10 days spent drinking and eating nonstop and I feel like garbage... fat garbage... just a note, flopping around in a pool/ocean cannot possibly burn off 8 litres of booze and enough Pad Thai to feed every starving child in Africa...

f**k you Ectos...;)

grass is always greener hey... hate having to eat like a medieval orphan but at the same time like it when people stop what they're doing to watch you lift

goal for this year is to have both... look and feel lean while lifting enough iron to affect the earths gravitational pull... after 6 weeks of good work I've fallen off the tracks... weaksauce... time to put down the beer and open a can of harden the f**k up

because your body digests x amount of protein per hour regardless of how much you give it.

So you prefer to load a ton of protein in one meal, and piss out 80% of it instead?? It's not hard to space your protein out over the course of the day.

Why wouldn't you take a slow release protein source before bed? Your catabolic period overnight must be quite significant closedeyes.gif

...I see no logic here

So you prefer to load a ton of protein in one meal, and piss out 80% of it instead?? It's not hard to space your protein out over the course of the day.

Why wouldn't you take a slow release protein source before bed? Your catabolic period overnight must be quite significant closedeyes.gif

...I see no logic here

Yea i have no idea what his argument is

anyone here tried doing slow reps? get the set to last near 70seconds. I have been giving it a go and cannot lift near the same amount of weight.

example is for bench 3seconds down, at at the bottom and 1 second up.

recommend giving it a go for a change.

I find slow reps or negatives are both good if you've got a minor injury or are feeling flat and can't push a heavier weight; you can still get an awesome workout while also changing it up a bit and keep the body guessing.

On the protein argument I've also read that those of us who take a lot of additional protein need to make sure we are getting plenty of calcium intake (i.e. through milk, or other sources, in other words check your protein supplement to make sure there is calcium in there as well). This is because the body uses calcium for protein synthesis. You don't want a calcium deficiency.

So you prefer to load a ton of protein in one meal, and piss out 80% of it instead?? It's not hard to space your protein out over the course of the day.

Why wouldn't you take a slow release protein source before bed? Your catabolic period overnight must be quite significant closedeyes.gif

...I see no logic here

I never said I loaded up on protein... no shit it isn't hard to space it out over the day, I just said you didn't have to. You don't piss out protein...

Why wouldn't I take "slow release" protein before bed? I dunno maybe the fact that by the time I goto fkn bed I've already hit my protein macros for the day so there's a shitload that will be released over the night.

I never said I loaded up on protein... no shit it isn't hard to space it out over the day, I just said you didn't have to. You don't piss out protein...

Why wouldn't I take "slow release" protein before bed? I dunno maybe the fact that by the time I goto fkn bed I've already hit my protein macros for the day so there's a shitload that will be released over the night.

Dude I suggest you do some research before posting...

"When a high dietary protein intake is consumed, there is an increase in urea excretion, which suggests that amino acid oxidation is increased.."

It depends on the types of protein you're consuming, unless you've been consuming a lot of slow-release proteins throughout the day, your overnight release won't last nearly as long as consuming something like casein before bed (4-6 hours release).

In response to slow reps, I always lower the weight slowly, and explode on the way up. Muscle fibres tear on the eccentric phase (shortening phase), so for example lowering the weight during a bicep curl is more important than raising it.

While on this topic, has anyone here gotten a friend to push down (encourage the negative phase of the lift) on a bar, etc. while you try to resist? It's like super negatives lol, crazy hypertrophy results

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...