Jump to content
SAU Community

Recommended Posts

Woah, I thought my diet was a pain in the ass to upkeep.

Girls I don't plan on kissing again ;)

Birds, you sir are the initial reason I stepped up my game.

You continue to provide solid motivation to this day. I commend you my fellow man.

alright you lot...

what's your best time at 300m Rower??

Are we using the same rowing machine guys? I swear to god I could smash 300m in under 3 minutes, but I never use the rower so there's a VERY good chance I'm misleading myself.

Markos, it would depend on his level of activity and conditioning obviously (not to mention body type and figures), so how much would you recommend then?

While 210g may be too much for him, it doesn't mean it would apply to all of your lifters.

For example I'm 87kg, lifting 5 times per week. If I consume 210g that's 2.4gr/kg/bw which is a pretty damn solid intake and my body sure wouldn't effectively use more unless I started training twice a day.

hrms.. I consume nearly that much program a day too, but told that's not enough

Cosa - have you tried it or just passing on what you've heard?

I started on 5/3/1in march and love it, after 5 months from no weight training of any serious nature,

Learning squat, military and dead lifts from scratch using ripptoes techniques, and lost 10kg weight, factor in adding muscle mass, that's a fair bit of fat.

BP 1.69

DL 2.46

MP 1.05

SQ 1.97

I'd recommend 5/3/1 to anyone that wants to progress easily. I was stuck at 1.08 on bench before starting also.

Edited by jangles

Is that a 1rm?

Yes. Tried for 120, but could only get it half way back up...stayed there for 10 seconds before I called the spotter haha. I'm very non-linear on bench - in the same session I could push out 2 x 110 or 7-8 x 100. I just get to a weight where the muscles say "that's enough" and you can't cheat your way into another rep on bench...or conjure more strength from other muscles...

Yes. Tried for 120, but could only get it half way back up...stayed there for 10 seconds before I called the spotter haha. I'm very non-linear on bench - in the same session I could push out 2 x 110 or 7-8 x 100. I just get to a weight where the muscles say "that's enough" and you can't cheat your way into another rep on bench...or conjure more strength from other muscles...

That would of been a long 10seconds!

Have you considered reverse pyramid style training?

That's funny cause I wasn't sure how to write it :P

It's a "nope I haven't considered that type of training", but feel free to suggest, elaborate and enlighten.

Birds, you sir are the initial reason I stepped up my game.

You continue to provide solid motivation to this day. I commend you my fellow man.

Awesome compliment! How has it been going for you anyway? Feel free to PM :)

hahaha no worries mate it's the truth :)

In preparation for an 11 night pacific islands cruise I've got Tuesday week, I cleaned the shit out of my diet and have cut back a bit. Dropped a little over 2kg now sitting on 75.5kg. I've done a 140kg deadlift for 1 rep just to see if I still had it in me, and it was f**king easy days! Sure I could pump 2x bodyweight no worries, but no point just now. Otherwise I'm still gaining strength while dropping fat, which according to Markos doesn't make sense :P very slow gains though, very slow. Getting pretty cut, so happy at the moment. I'll provide a proper update with pics in my thread next weekend ;)

That's funny cause I wasn't sure how to write it :P

It's a "nope I haven't considered that type of training", but feel free to suggest, elaborate and enlighten.

basically you warm up to 60-80% of your top set,

Have a 3-5min rest, whatever suits,

Then punch out your top set using all your energy, recover.

Reduce weight 10-15%, do two more reps than last set. Rest

Reduce weight 10-15%, do two more reps than last set.

allows you to get your max out whilst in a deficit.

I've done this, overlaying 5/3/1. Works a treat for me.

Edited by jangles

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well, after the full circus this week (new gearbag, 14 psi actuator on, injectors and AFM upgraded, and.....turbo repair) the diagnosis on the wastegate is in. It was broken. It was broken in a really strange way. The weld that holds the lever arm onto the wastegate flapper shaft broke. Broke completely, but broke in such a way that it could go back together in the "correct" position, or it could rearrange itself somewhere else along the fracture plane and sit with the flapper not parallel to the lever. So, who knows how and when exactly what happened? No-one will ever know. Was it broken like this the first time it spat the circlip and wedged itself deep into the dump? Or was it only broken when I tried to pry it back into place? (I didn't try that hard, but who knows?). Or did it break first? Or did it break between the first and second event of wierdness? Meh. It doesn't matter now. It is welded back together. And it is now held closed by a 14 psi actuator, so...the car has been tuned with the supporting mods (and the order of operations there is that the supporting mods and dyno needed to be able to be done first before adding boost, because it was pinging on <<14 psi with the new turbo with only a 6 psi actuator). And then tuned up a bit, and with the boost controller turned off throughout that process. So it was only running WG pressure and so only hit about 15-16 psi. The turbo is still ever so slightly lazier than might be preferred - like it is still a bit on the big side for the engine. I haven't tested it on the road properly in any way - just driven it around in traffic for a half hour or so. But it is like chalk and cheese compared to what it was. Between dyno numbers and driving feedback: It makes 100 kW at 3k rpm, which is OK, could be better. That's stock 2JZ territory, or RB20 with G series 550. It actually starts building boost from 2k, which is certainly better than it did recently (with all the WG flapper bullshit). Although it's hard to remember what it was like prior to all that - it certainly seems much, much better. And that makes sense, given the WG was probably starting to blow open at anything above about 3 psi anyway (with the 6 psi actuator). It doesn't really get to "full boost" (say 16 psi) until >>4k rpm. I am hopeful that this is a feature of the lack of boost controller keeping boost pressure off the actuator, because it was turned off for the dyno and off for the drives afterward. There's more to be found here, I'm sure. It made 230 rwkW at not a lot more than 6k and held it to over 7k, so there seems to be plenty of potential to get it up to 250-260rwkW with 18 psi or so, which would be a decent effort, considering the stock sized turbo inlet pipework and AFM, and the return flow cooler. According to Tao, those things should definitely put a bit of a limit on it by that sort of number. I must stress that I have not opened the throttle 100% on the road yet - well, at least not 100% and allowed it to wind all the way up. It'll have to wait until some reasonable opportunity. I'm quite looking forward to that - it feels massively better than it has in a loooong time. It's back to its old self, plus about 20% extra powers over the best it ever did before. I'm going to get the boost controller set up to maximise spool and settle at no more than ~17 psi (for now) and then go back on the dyno to see what we can squeeze out of it. There is other interesting news too. I put together a replacement tube to fit the R35 AFM in the stock location. This is the first time the tuner has worked with one, because anyone else he has tuned for has gone from Z32 territory to aftermarket ECU. No-one has ever wanted to stay Nistuned and do what I've done. Anyway, his feedback is that the R35 AFM is super super super responsive. Tiny little changes in throttle position or load turn up immediately as a cell change on the maps. Way, way more responsive than any of the old skool AFMs. Makes it quite diffifult to tune as you have to stay right on top of that so you don't wander off the cell you wanted to tune. But it certainly seems to help with real world throttle response. That's hard to separate from all the other things that changed, but the "pedal feel" is certainly crisp.
    • I'm a bit confused by this post, so I'll address the bit I understand lol.  Use an air compressor and blow away the guide coat sanding residue. All the better if you have a moisture trap for your compressor. You'd want to do this a few times as you sand the area, you wouldn't for example sand the entire area till you think its perfect and then 'confirm' that is it by blowing away the guide coat residue.  Sand the area, blow away the guide coat residue, inspect the panel, back to sanding... rinse and repeat. 
    • The detail level is about right for the money they charge for the full kit... AU$21.00 each issue, 110 issues for a total of $2,300 (I mentioned $2.2K in the first post when the exchange rate was better). $20/week is doable... 😐
    • If planning on joining us for the day(s) please indicate by filling in this form. https://forms.gle/Ma8Nn4DzYVA8uDHg7
    • You put the driver's seat on the wrong side! Incredible detail on all of this. It looks like you could learn a lot about the car just from assembling the kit.
×
×
  • Create New...