Jump to content
SAU Community

Recommended Posts

that's the fitness and health world for ya, everybody's an expert except for beginners :)

yeah Dan HIIT stuff kills me even if it's only for a short time still, but I've noticed that doing a lot of strength training has now enabled me to start doing cardio without feeling like I'm going to die. From all of my reading, and from what I've seen with my own progress, it's doing a lot more benefit for me than the 3km walks or steady state treadmill work I was doing previously. Which is good, because I'm not a huge fan of doing hours of cardio (purely for excercise that is)

A muscle twice as strong only has to work half as hard, hence cardio is easier :)

But then you have a bunch of other stuff, fast and slow twitch and blah blah who cares.

And like a battered wife you keep coming back for more

You really have a way with words....

Dezz: Yeah I think you get that with any topic that people are passionate about, divided opinions that is. Some people are better at feeling OK with the fact that others prefer to do things their own way as it works for them whereas some insist there's only a few ways it can be done and get their panties in a bunch when people find a way that works for them but doesn't conform to the masses. In reality, depending on the topic and the context both views can be accurate.

Feel free to throw your 2 cents in though, it's always good to have extra opinions and you can always do it hit and run style like TTT who tends to go about it drive by shooting style :D

Question: Is incline press considered a better/more complete exercise or more "compound" exercise than flat?

I've only ever flat benched.

If I can get some extra shoulder/arm work during the bench portion of the session that's a nice bonus.

By "more" I simply mean, more involvement from other major muscle groups that will benefit.

As I understand it, the incline will hit the shoulders and potentially tri's a bit more than flat, depending on grip.

Is that a fair call or have I got it ass about?

If you had to choose one only, I already spend a good hour plus by the time I've warmed up so more time is not on the cards.

Question: Is incline press considered a better/more complete exercise or more "compound" exercise than flat?

I've only ever flat benched.

If I can get some extra shoulder/arm work during the bench portion of the session that's a nice bonus.

They are both compounds. I think what you mean to ask is, which one involves more work or is more effective?

Have heard some bodybuilders say incline is the better exercise for hypertrophy. Meanwhile, from a lifter point of view, incline is just a great assistance exercise for increasing your flat bench and targeting weakness in the main lift; it has more emphasis on delts than chest. Common to do with dumbells, as this involves more stabilisers than a barbell. I used to do flat bench, then a back exercise, then incline press...I found this allowed my shoulders to recover from bench a bit before hitting incline.

Wish I could still do it :(

Maybe one day...

Aww shit I'm about to get Birds'ed

All the details are in my hektik build thread.

As for warm up it is almost entirely having a very good stretching through all my arms/back/legs/bad ankle whle I talk with Kate about how my/her days was. Then I'll go and grab an empty bar and do a few squat reps to loosen up more before getting in to it.

Haha nah I'm just curious...though I was looking for a reason you can't fit incline in as well as flat bench. Do it instead of stretching back and legs and talking to missus. The latter can be done after sex.

Honestly, If I was going to add any exercises/time to my routine they would be leg focused.

Probably enough upper body stuff in there already.

After sex lol, after sex I am doing nothing but zzzzzzzzz and maybe some light dribble.

M/W/F routine as listed in build thread.

Used to be 3x8 at set weight, been recently playing with 5x5 and increasing weights with each set + shorter breaks.

Edited by ActionDan

Increasing weights with each rep, that's a fair talent you have...you must be tired :P

When I was capable of doing more upper body exercises, I used to do a split: two workouts, twice a week, for 4 sessions all up. They went for just over an hour each, so was able to fit in a fair few exercises including incline and decline press, several lat movements etc. It all worked well without one exercise interfering with another too much. Only leg exercises were deads and squats.

Then shoulder injury...and suddenly I'm doing the opposite...more leg exercises than upper body. This does feel a lot better when you consider the tree analogy, that a tree is only as strong as it's trunk and trunks are supposed to be 10 times thicker than branches. Even if I do return to a lot of my upper body movements, I'll prolly stick with the ideology that legs should have more emphasis. It is fortunate that squats are such a complete leg exercise, though, where as the upper body needs 4 or 5 different exercises to work everything in there...so it's not too bad if your routine has a focus on upper body, as long as you are doing those big three compounds IMO.

Hahah yes I fixed the typo.

I put that routine together based on various readings and advice from many on here so I don't have too many complaints about it.

It was hard to adapt to no curling...... (not really)

Squats and deads are getting "somewhere" When I started doing them it was with an Ezy bar and 30kg total weight and my ankle was all "f**k you man". Now at least it's at BW and my ankle is more like "ok I can deal with that but you may not also jog daily and work on the car too much on weekends, walking is fine and some car work is fine but if you disregard my wishes I shall swell up like a mofo and jam up on you playa!"

So yeah he's a bit of a dick sometimes...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...