Jump to content
SAU Community

Recommended Posts

Flexibility and squat depth is irrelevant.

Max cant touch his toes, squats deeper than anyone here

Its mobility you should be looking at

No one here stretches, but most do mobility exercises, although Max and Martin don't.

What they do do is perform every rep of every set to its correct range of motion, even warm ups with empty bars

Just food for thought

Dan does, he is very tight in the hips, yet can kick over anyones head (2 x World Kickboxing Champ). Very flexible, yet lacks mobility in the hips.

Mobility World seems to be the best site for that stuff, has some very good information on there

had to squat on the smith machine last night, found i could go much much lower then when I do with the bar by itself. Probably another 2 inches. Not sure why, I wasn't leaning back into the squat and using the machine to balance myself (if that makes sense). Weight was 10kg lighter but even when I warm up with the bar only, I don't get that low.

Fark squatting in the smith machine even when the Olympic bars are being used. I just do goblet squats instead (yeah, can't use the same weight but it still pummels my legs well with a 50gk dumbbell lol)

had to squat on the smith machine last night, found i could go much much lower then when I do with the bar by itself. Probably another 2 inches. Not sure why, I wasn't leaning back into the squat and using the machine to balance myself (if that makes sense). Weight was 10kg lighter but even when I warm up with the bar only, I don't get that low.

because of the pulley system and the controlled nature of the bar (no,you werent needing to control it as much) that 10kg lighter was probably 40kg lighter. generally any excerise on a machine is easier than free weights.

Is it because the assisted lift means more numbers which means more bragging rights to your gymbros or is it about safety?

I've often thought a spotter would be nice at home, especially when I'm going up in weight on something.

How's the whole no cheese thing going Leesh?

I enjoyed a little Camembert last night, just saying...

I'm eating cheese once or twice a week now, however I've stopped consuming cheese and crackers and eating cheese on its own as a snack. Still the same weight so I don't think it's going to make much of a difference now.

The Smith machines at my gym don't have pulleys (no assistance), the bar just slides up and down two poles and looks like it would be heavier than or the same weight as a normal bar bell. Friction of the poles probably adds resistance too.

It's a shit motion though. To me, it's only good as an adjustable pull up machine and I'd rather wait half an hour for squat racks to free up. My mother nailed freeweights bench and squats the first time she tried them, no excuse not to learn how to balance a bar.

Just work on that mobility if you want to squat lower. Everyone can do it, everyone can sit in a seat and pull their knees up to their chest, their body just doesn't trust itself during squat motion.

IMO it's easier gaining weight than it is loosing it, but that's just my personal view others may disagree,

Agree and disagree. Losing weight is only difficult mentally, since ultimately all you need to do to lose WEIGHT is be in a deficit - don't actually need to do any exercise. Gaining weight is easy as hell, since all you gotta do is be in caloric surplus.

Losing FAT while retaining muscle = both physically and mentally difficult

Gaining MUSCLE = physically difficult

There is NO excuse for curling in the squat rack, short of wanting to curl excess of ~45kg (heaviest most fixed-weight dumbbells I've seen go to) specifically with a straight bar.

The smith machines Anytime Fitness have are ever so slightly assisted, but only enough to slightly offset the weight of the bar without any plates (makes bar weight 9kg, and also makes it move much slower without weight)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...