Jump to content
SAU Community

Recommended Posts

Flexibility and squat depth is irrelevant.

Max cant touch his toes, squats deeper than anyone here

Its mobility you should be looking at

No one here stretches, but most do mobility exercises, although Max and Martin don't.

What they do do is perform every rep of every set to its correct range of motion, even warm ups with empty bars

Just food for thought

Dan does, he is very tight in the hips, yet can kick over anyones head (2 x World Kickboxing Champ). Very flexible, yet lacks mobility in the hips.

Mobility World seems to be the best site for that stuff, has some very good information on there

had to squat on the smith machine last night, found i could go much much lower then when I do with the bar by itself. Probably another 2 inches. Not sure why, I wasn't leaning back into the squat and using the machine to balance myself (if that makes sense). Weight was 10kg lighter but even when I warm up with the bar only, I don't get that low.

Fark squatting in the smith machine even when the Olympic bars are being used. I just do goblet squats instead (yeah, can't use the same weight but it still pummels my legs well with a 50gk dumbbell lol)

had to squat on the smith machine last night, found i could go much much lower then when I do with the bar by itself. Probably another 2 inches. Not sure why, I wasn't leaning back into the squat and using the machine to balance myself (if that makes sense). Weight was 10kg lighter but even when I warm up with the bar only, I don't get that low.

because of the pulley system and the controlled nature of the bar (no,you werent needing to control it as much) that 10kg lighter was probably 40kg lighter. generally any excerise on a machine is easier than free weights.

Is it because the assisted lift means more numbers which means more bragging rights to your gymbros or is it about safety?

I've often thought a spotter would be nice at home, especially when I'm going up in weight on something.

How's the whole no cheese thing going Leesh?

I enjoyed a little Camembert last night, just saying...

I'm eating cheese once or twice a week now, however I've stopped consuming cheese and crackers and eating cheese on its own as a snack. Still the same weight so I don't think it's going to make much of a difference now.

The Smith machines at my gym don't have pulleys (no assistance), the bar just slides up and down two poles and looks like it would be heavier than or the same weight as a normal bar bell. Friction of the poles probably adds resistance too.

It's a shit motion though. To me, it's only good as an adjustable pull up machine and I'd rather wait half an hour for squat racks to free up. My mother nailed freeweights bench and squats the first time she tried them, no excuse not to learn how to balance a bar.

Just work on that mobility if you want to squat lower. Everyone can do it, everyone can sit in a seat and pull their knees up to their chest, their body just doesn't trust itself during squat motion.

IMO it's easier gaining weight than it is loosing it, but that's just my personal view others may disagree,

Agree and disagree. Losing weight is only difficult mentally, since ultimately all you need to do to lose WEIGHT is be in a deficit - don't actually need to do any exercise. Gaining weight is easy as hell, since all you gotta do is be in caloric surplus.

Losing FAT while retaining muscle = both physically and mentally difficult

Gaining MUSCLE = physically difficult

There is NO excuse for curling in the squat rack, short of wanting to curl excess of ~45kg (heaviest most fixed-weight dumbbells I've seen go to) specifically with a straight bar.

The smith machines Anytime Fitness have are ever so slightly assisted, but only enough to slightly offset the weight of the bar without any plates (makes bar weight 9kg, and also makes it move much slower without weight)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...