Jump to content
SAU Community

Recommended Posts

Yeah it's excusable to use it when you've got no alternatives and can't weight around. Personally I only use the smith machine for shrugs and the occasional behind-head military press application (out of laziness).

what about standing military press in the squat rack? I find using the longer bar a million times better then the short barbells.

CURLING :P I also agree with your point on military press with the Olympic bar. It's strange how 40kg with the Olympic bar feels much more natural than 40kg with the fixed barbells.

There is NO excuse for curling in the squat rack, short of wanting to curl excess of ~45kg (heaviest most fixed-weight dumbbells I've seen go to) specifically with a straight bar.

Still a more horrible excuse than Twilight.

No reason these twits can't stand in front of a mirror elsewhere and pick the barbell up off the ground. If they can't supinated deadlift more than they curl, they should probably reconsider their gym routine - nay, life.

I don't

I think I do because I research, ask questions, listen to advice, use iifym and I'm making gains in the gym

If it were correct, you'd be mad to ask the question. I mentioned correct, correct would be what works for you.

Just because someone does something that is known to work, doesnt mean they are doing it right for it to work for them. as i'm sure you are aware.

either it is not implemented properly or you arent patient enough.

Agree Jangles. There are plenty of people who go to the gym for years and never get anywhere close to what they want because they falsely believe they are doing things correctly. Then it becomes a case of "gym just doesn't work for me" or "this is as good as it gets for me".

There are also people who chop and change the advice they get because they don't like one part of if or they are OCD about doing things a certain way = YNDTFP

IIFYM is to obsessive for me, I go by calories and making sensible choices (i.e not eating my calories in 'whatever' purely for the sake of it). Still working so far, but finding it harder to avoid processed carbs etc now that I'm living with the mrs.

I think each mind and body will have a natural level it likes to sit at, by that I mean that you exercise and eat well (your mental commitment) and do all the right things (your physical commitment) and the weight will drop to level, say "X", easily enough or within a a reasonable time frame.

From there, the effort taken to drop further KG's may be disproportionate if you get me. You were exercising 4 times a week for 1hr, but to drop another 5kg requires 6times a week for 90mins, a considerable increase for what appears to be a smaller gain.

It's the same trying to get stronger, people talk about noob gains, my squat and DL are really evident of this. The first chunks come easy and with only a reasonable commitment in time/effort. To get properly strong requires much larger investments of time/money/ etc.

So in the first 3mths you double your squat, then it takes 9mths to do the same again, then it takes 12mths to add another 25% and the time taken to increase goes up and the gain gets smaller.

It's a trade off.

I wouldn't stress to much about the numbers on the scale, I've seen plenty of girls who look fantastic and weigh far more than girls who don't eat or exercise and look like jelly wafers (thin and wobbly).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...