Jump to content
SAU Community

Recommended Posts

Nah haven't had it looked at. Gave up on squats and deads at the same time due to constant flaring up of SIJ area and related muscles...though now when I come back to giving squats a shot, I simply can't get the bar into position with my hands on it (at any useful width) without this horrid pain. Would this be a physio's field if I were to see a professional about it?

I'd say physio, but personally i prefer a GOOD remedial massage. they cover more than one spot for the same money.

chiro sorted my back out when it wasn't aligned correctly

physio sorted my knees out when I could barely walk after one game of tag or a good leg session.

will vouch for both of them depending on the issue.

Fair enough Figjam. Trigger point has helped with my migraines over the last 8 years and also sorted out any injuries. When I first injured my shoulder 12 years ago I went to physio and chiro and they didn't help at all, I've now got permanent muscle trauma which makes my shoulder susceptible to injuries. I'm wilinging to give them another go though.

I guess it comes down to the type of injury and how good the chiro or physio is.

I would always go to a physio that specializes in sports injuries rather then any other type of physio.

My chiro came recommended so can't really help there.

chiro sorted my back out when it wasn't aligned correctly

physio sorted my knees out when I could barely walk after one game of tag or a good leg session.

will vouch for both of them depending on the issue.

I agree somewhat. Chiro will align back etc, instant pain relief usually, but don't adress the issue of the muscles that stretched to let it shift in the first place.

Trigger point therapy is good, but not everyone will have trigger points.

People will have their preferences, usually because the person that fixed them is good at their job and a bit more. not just a drone.

Troy, I'm booking a physio today; really don't want to as I think physios and chiros are bullshit / a waste of money, but going to give it a go... If I am you should too!

I've used an osteopath in the past who definitely knew what he was talking about. Physio I've seen before for one unrelated issue and was a bit sceptical afterwards but didn't really judge based on one experience heh....definitely will see another professional though, since I've gone and got myself private health cover specifically for these uses!

I'd say physio, but personally i prefer a GOOD remedial massage. they cover more than one spot for the same money.

I'm not quite convinced it'll be an issue remedial massage will fix, unless massage can be a substitute for stretching :P but either way, will definitely see a physio to see what/where they believe the problem lies, then take it from there :)

Cheers for the inputs y'all :)

140/100/180 x 1 rep, performed correctly. Below parallel squat, bum stays on bench, no hitching.

No gloves, bitch pads or wrist straps, belts or knee wraps.

Some of you may know or remember, I never allowed belts or knee wraps in my gym till 2011, a full 3 years after I opened. The logic behind this was I felt we had to get strong before we added support gear. Looking by the numbers the guys are doing now, I feel justified in my approach.

I'd agree with that, as in the numbers are a bit high to be classified as a beginner, but I'm talking average gym goer standards, not Markos PL training method standards.

So to us, they are good numbers to aim for and most of us would look pretty decent and be happy with those numbers, but to Markos it's just the tip of what he knows people can do and he's literally in it to win it so you gotta aim high to achieve greatness.

It's just a difference in perspective.

Edited by ActionDan

cheers,

why against belts? I use a belt for squats and deads, I find it gives me extra confidence on the lift and when I forget it, I get back issues, the very same pain (right on my spine) that the chiro fixed.

I could probably go without the belt on deads, but squats would take some big convincing.

Also reading your newsletter, those lifts should be achievable within 12 months of solid training and diet? quicker depending on effort.

I know how Markos will respond to that as well lol. He'll probably say he'll listen after you post your results.

I train with two big strong looking guys and they both only just surpass those 'beginner' numbers. I also have never seen anyone at my gym go over 100kg bench, or 100kg squats / deadlits. Even the aesthetic, bulky looking guys.

I've never stepped foot in a PTC though, and from all the reading, it seems to be more of an indicator of just how weak people at commercial gyms are, given how many people go to PTC and can surpass those numbers easily.

I stopped using gloves / pad on squats, I prefer not using either now - I think i was using them as a crutch for a lack of strength.

Okay, lets go through this.

Liam Pannel, in 2 years of barbell training (did 6 months of light kettlebells as he was 12 years old) managed to squat 170kg, bench 110kg and deadlift 200kg, at 81kg bodyweight. Liam still plays football and its the reason he lifts.

So can I class a 14yo with 2 years training anything but a beginner?

Conor Zyskowski, 17yo, 86kg, 240kg squat, 120kg bench and 245kg deadlift, less than 3 years lifting, first 2 years while he was still playing soccer, not powerlifting.

Jesse Markopoulos, 19yo, 66kg, 180kg squat, 115kg bench, 200kg deadlift, quit basketball in December 2012 to take up powerlifting.

Max, at 17, only lifting for soccer, decides a week out to compete in a PL meet, at 72kg goes 160kg squat, 97.5kg bench and 212.5kg deadlift. Had done ZERO powerlifting training, the bench press gives the best indication.

Not one of these kids had started out to power lift, just general gym training for other sports, all teenagers. How could I possibly set the standard any lower.

Our absolute weakest powerlifter, at 70kg, goes 155kg squat, 110kg bench and 200kg deadlift.

So I've shown you the numbers of our youngest, lightest, inexperienced and weakest lifters. What do you guys think I should use as a bench mark?

Is it harsh that maybe youve been wasting your time?

Try this. Our Elite lifters do an 11 week program that adds 10kg per lift, you can do this 4 x year. Remember adding 10kg to a 170kg bench is not easy, adding 10kg to a 80kg happens in your sleep.

So if you join the gym, and squat 60kg on your first session, which 99% of my first timers do, going by my 40kg per year example for Elite lifters, you'll squat 100kg in 12 months (usually 2 months here). In 2 years, adding another 40kg, theres your 140kg.

Now can anyone argue that you shouldnt be classed a Novice lifter if you cant replicate that? The fact is most do it here in 6-12 months. If I was to make it 120kg, quite a few would be intermediate lifters within a month of training.

Max started at 51kg, squatted 110kg at 55kg, double bodyweight within weeks, he managed 140kg within around 3-6 months, at around 60kg and 15yo.

I havent bothered with the bench and dead because EVERYONE will hit 100kg within 12 months and I've had more than 1 guy pull 180kg on his first session.

I think we've been over this a number of times. Not everyone has the same goals, not everyone wants what you or PTC want and that should be completely fine. That aside, people need to stop getting so pissy when Markos makes the comments he does, yes he delivers bluntly but he's giving you his honest opinion based on his particular point of view, you don't have to like, listen or accept it (unless you want to be a PLer or you want to get bigger numbers then you might want to listen).

There is nothing wrong with Markos statement that those numbers = beginners, not only from a PL point of view but from a general strength point of view. If any man can turn up and pull 100kg deadlift in his first session then that must be considered roughly the starting point for most people, he'd know he's seen his fair share, how many of us have trained others to the degree that he has? If one guy gets to 160, he still considers himself to have improved on his starting point, and thus does not consider himself a beginner anymore, when he started out he could "only" do 100 remember, which is fine for that guy and from his point of view is accurate, but in Markos land, knowing what people need to pull to be competitive, which is his goal, it's not nearly enough.

It's just opinion and perspective and it makes f**k all difference so could we please shut the f**k up about the numbers and whether or not you are a beginner unless you are competing. The only number any of you need to worry about is how much above you've improved from what you started at and whether you want more than what you have, who gives a shit if random people on a forum think you are this or that. If you've added 10,20, 50, 100% to your starting weight then you have improved and you are now stronger than you were so good job, keep at it.

Edited by ActionDan

fark it, despite all logic telling me not to, I'll bite;

rev - before (the last time this came up) you said pre-workouts were useless and placebo's, I took that to mean 'all'. Now you are saying only non-banned ones don't work... slight change of tune.. I think I know why....

Before when asked how you go from 15-25 reps or whatever it was, you said to take creatine and was it L'Arginine(?) as they can help you push out a few extra reps (apologies if I am incorrect on the l'arginine, im sure it was something like that)... now its beer (granted your taking the piss).

Those ingredients are in most if not all pre-workouts both banned and not banned. How do they work in isolation but not in a pre-workout? Yes the pwo has other ingredients as well and not all good but they do have those ingredients. My point? they are not all placebo's and useless as you make out. Slight contradictions imo.

Just saying....

Edited by SRS13
  • Like 1

sounded like you were leaning towards the reason that Markos considers those lifts to be beginner bench marks was due to him training only power lifters with 1RM's in mind. Only reason.

don't disagree on the complete point that you have/tried to make.

I thought this covered off on that point.

"There is nothing wrong with Markos statement that those numbers = beginners, not only from a PL point of view but from a general strength point of view. If any man can turn up and pull 100kg deadlift in his first session then that must be considered roughly the starting point for most people, he'd know he's seen his fair share, how many of us have trained others to the degree that he has?"

Markos - at what point do you recommend a person going from the whole body workout to the PPP workout as I'm assuming you don't start people on PPP - or do you? If so, for what reason would you recommend one over the other? Would you alternate between them? Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...