Jump to content
SAU Community

Recommended Posts

Dan tore his pec pretty badly earlier in the year. He switched to reverse grip to take the load off his pec, and found out he's stronger with that grip.

His PB when he tore it was 167.5kg, done on the same session he tore his pec, I think he'll get 185kg next weekend

I've watched enough PTC videos to know you know what you're talking about when it comes to strength training and getting real results. It's why I try and follow your method of training.

When you put it like that, I now understand why you say that we aren't going to get to that level training by ourselves in commercial pleasure spa gyms. Explains a lot actually about the difference of actually training there, rather than just seeing it as you teasing us with the unattainable for the sake of it.

I do believe you get it now Bozo

You could go out into the street and kick a footy around for hours, and never be as good as the guys in the AFL, even Richmond players lol

So PTC isnt simply a gym, so much more

We have lifters train at PTC in Carrum Downs that live in Caroline Springs, Elwood, Fitzroy, Croyden, Templestowe.

Looks like a gun teen lifter is moving from Adelaide to Carrum Downs to simply train with us before the end of the year.

You have got it bozo

Im not 'training' at the moment . I am mucking around. I will be training when i get serious and go to a gym

Not what i do at the moment

All these factors are in context that i mention. Training. Not pissing around

Edited by rev210

Over doing it = undereating or sleeping

Exactly this. It's less "over training" and more "under resting" so to speak. Another reason I got such got results when I was unemployed lol, had all the time in the world to recover.

That exercise is how I injured myself

Standing press is a good movement , however it needs good technique like all good movements as it's a compound one. It's not hard to do but, you should understand it.

People get taught to do it wrong or not at all. The stabilisation strength of the upper back and shoulders is very important. If you are managing a challenging weight , then not doing things correctly can hurt your upper back/spine. Mostly people do the basics wrong. Not drawing in lots of air and stabilising the core (abs are tense but, pushed out). I. Also,pre-fatiguing the shoulder stabilsing muscles with things like volume bench press or other isolation shoulder movements beforehand is a fail.

Behind the head is not a beginners variation let alone snatch grip width.

It was my first exercise of my program so I wasn't pre fatiguing with other volume work, but something went wrong when I started doing 25kg. I used to have alot of people ask me why I was doing behind the head.

I don't think it was this exercise that got you. You were using fine technique last I saw you do it. It could have aggravated a predisposition, certainly.

So my shoulder went twaannngg during the exercise and it wasnt this exercise that has left me screwed?

What was it then?

It would be the technique then Leesh. Were you also taking the bar off the ground with a 'clean' or did you take it out of a rack? Picking it up off the ground is good training but, you need to know how to do it right also.

I did test of a few 100kg military press sets today (I clean & press these) ,speaking with some reasonable past experience. I would not consider behind the neck press at any weight a part of my training if I was to seriously bother. It requires more scapular strength to stabilise if you do it right and stresses the rotator more, pretty much for no other reason than to be a hero.

Once you get better drop the behind the neck thing. You can get tips on Military press if you want to do it correctly, I think it's a good compund movement.

It would be the technique then Leesh. Were you also taking the bar off the ground with a 'clean' or did you take it out of a rack? Picking it up off the ground is good training but, you need to know how to do it right also.

I did test of a few 100kg military press sets today (I clean & press these) ,speaking with some reasonable past experience. I would not consider behind the neck press at any weight a part of my training if I was to seriously bother. It requires more scapular strength to stabilise if you do it right and stresses the rotator more, pretty much for no other reason than to be a hero.

Once you get better drop the behind the neck thing. You can get tips on Military press if you want to do it correctly, I think it's a good compund movement.

clean and jerk to get it up behind my head.

So my shoulder went twaannngg during the exercise and it wasnt this exercise that has left me screwed?

What was it then?

ALike I said, you were likely predisposed...this exercise may have simply been the straw that broke the camel's back. It'd quite a strict movement; one of the reasons it is done behind neck, because there is little variance in the range of motion. As long as you're taught and execute it correctly, this makes it one of the safer shoulder exercises. But no amount of safety in a range of motion will save you if not everything is sitting right when you do it.

Just use a squat rack when you get back into it. get the technique sorted on the standing press. It's pretty easy with practice and one less thing to worry about while getting it perfect.

So are you suggesting to use the squat rack and do it behind my head still?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...