Jump to content
SAU Community

Recommended Posts

Congrats man well done :)

I got myself a new PB on deadlifts this morning with 175kg. Did it after a set of 3x 165kg too :D

Hold on...that sounds like...BIRDS VOLUME TRAINING...what gives man?

Is that the most you've ever pulled on deads? Congratulations. What are you shooting for next?

I had some 95kg jacked dude approach me lastnight after a set of 5 x 160 on deads and ask me how many of them I got out and what weight it was. I said 5 of 160 and he asked me if I do powerlifting. I said nah, but I train kind of similarly with the exercises, what about yourself? He said he does crossfit! Real friendly guy...had the friendly demeanor of a personal trainer, but without the insincerity of trying to collect a client lol. He congratulated me on what I was lifting and it was nice getting accolades from someone a lot bigger than me; even if his size is not my goal, he'd put some serious work into his body and was either impressed with what I was lifting for my frame size or being nice and encouraging :)

Also how do you get that jacked from crossfit alone...I know some of the pros like Rich Froning are quite sizeable, but they usually have lifting backgrounds or routines to back it up too.

Haha sorry bro, definitely not :P 5x 100, 3x 165, 1x 175.

It's the most I've pulled by 2.5kg :) well go for 180 next session though!

I dunno brah, 1RM after working sets...very Birdsesque.

They are pricey but the smaller the plate the better...it's pretty much a guaranteed plateau breaker. Would buy a cheaper alternative for sure but would still want the same weights.

Been reading 'Strength Training Anatomy' over the last couple days. http://www.amazon.com/Strength-Training-Anatomy-3rd-Edition/dp/0736092269

I find it pretty good for some one like me with only a basic knowledge of this stuff. Lots of colour pictures to look at :P

Anybody read it/have any opinions?

Got any suggestions for other anatomy or training books?

Been reading 'Strength Training Anatomy' over the last couple days. http://www.amazon.com/Strength-Training-Anatomy-3rd-Edition/dp/0736092269

I find it pretty good for some one like me with only a basic knowledge of this stuff. Lots of colour pictures to look at :P

Anybody read it/have any opinions?

Got any suggestions for other anatomy or training books?

Starting Strength

5 x 160 set on deads sounds good Birds, how much are you weighing in at now?

80kg mate, it never changes haha

Think I'd be 80 even if I got up to 250

Thanks :)

There's 6 reps in there but I usually save it for a 180-190 single after that.

200 for a single, but with bigger singles come more reps. 180 used to be my 1RM, but once I got to 190 I was able to do 180 x 2. Same deal will apply when I get to 210 and then it'll be reps of 200 :)

Yeah they say it is supposed to come easier after that 200 mental barrier. I figure that's real good for 80kg BW mate.

I found 5/3/1 helped my max a bit on a few things including the OHP and dead.

Stubborn Birds got a 115 bench tonight, so another 5kg and we are home for a new pb :)

117.5kg single for an equal personal best, after 6 reps of 100kg on the previous set. Was a much easier feeling lift than I used to do it, too. 120 next session. Waiting for the bench plateau monster to kick in!

Might need to start a bench progress thread ala the deadlift/squat/pull-up threads.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thanks for that mate always a good help
    • It's not really a calibration issue, if the voltage is really at 2V. If the voltage is 2V, then that's what the TPS is putting out, and the Haltech is seeing that and 2V is about 40% open (you know, between 0.45v being closed and something close to 4.5V being fully open). So, that would suggest that the TPS is maladjusted, on crooked, something something something. Or a wire problem.
    • Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
×
×
  • Create New...