Jump to content
SAU Community

Recommended Posts

Hi guys, new member here and new to the Nissan scene (I'm a Toyota guy mostly) so go easy on me. :blink:

I recently purchased a Toyota Century V12 engine and I'm currently looking for something to put it in. After much thought an R32 GTSt is at the top of the list for a number of reasons, not least of which is the fact they're incredibly cheap now plus there's a broad range of suspension/brake/whatever upgrades available for them.

No doubt over the coming months I'll have lots of questions, but for now I'm wondering if anyone has heard of a similar project? A brief Google search turned up that R34 with a quad-turbo Mercedes V12 (looks cool but way more coin than I'd be willing to spend), are there any other V12 Skylines?

For anyone who's interested, the engine I have is designated 1GZ-FE and is fitted to the 1998-current Toyota Century. It's a 5.0-litre 60-degree V12, all alloy construction, DOHC 48-valve VVTi, and officially rated at 280ps although I have a feeling the true output is a good deal higher. I happen to own one of these cars and it ran 15.9 @ 90mph at Willowbank raceway; not bad for a bone stock 2000+ kg luxo barge.

Info on the Century here:

http://en.wikipedia.org/wiki/Toyota_Century

Info on the 1GZ here:

http://en.wikipedia.org/wiki/Toyota_GZ_engine

And here's some detail on one of my previous projects (2JZ into early Supra), just so you know I'm not a n00b who's never done an engine conversion before:

http://www.norbie.net/Project2JZ/

Thanks guys, I look forward to hearing any comments or opinions. :ninja:

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/
Share on other sites

Nope not heard of a V12, had a mate that looked at putting a v8 in a GTR but it didn't fit.

With a V12 pumping out some serious torque and power, maybe you should look at a GTR shell and running gear. Use 4 wheels to get the power down. Some of the modded GTS-T's have big troubles getting the power down, but with a V12???

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3571865
Share on other sites

Top Secret has a V12 1GZ-FE powered Supra with turbos and the works.

It'll be interesting, but pretty hard work. Easier to do an LS1 swap into an R32 for big numbers, there's a couple running around.

There's also this beast:

735u6828.jpg

using one of these:

nissanskylinegtrv12moteur.jpg

a Mercedes Benz 600 S Class engine which has been Quad Turbo'd

Configuration : V 12 cylinders

Capacity : 6715 cc (89 x 90 mm)

Valve actuation : 4 over head camshafts, 48 valves

Forced induction : 4 turbochargers

Max. power : 1000 horsepower

Max. torque : Over 100 kgm

Clutch : Multiplate

Gearbox : 6 speed sequential

Chassis : Multipoint rollcage welded to the shell

Suspensions : Double whishbones, KW adjustable shocks

Brakes : 381 mm discs (front) 355 mm (rear)

Wheels : 13 x 18 magnesium

Tires : 345/35-18

Length : 1910 mm

Width : 1910 mm

Height : 1215 mm

Weight : 1000 Kg

0 to 60 mph : 3 seconds

Quarter mile : 9 seconds

Top speed : 220 mph

http://skylinev12.neufblog.com/skylinev12/

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3571873
Share on other sites

I'm aware I could get the same or better results with other engines, but that's not what this is about; I already have the engine, it just needs a new home. R32 makes sense for a number of reasons. :P

Transmission will be a Tremec TKO600, it's about the only manual transmission that will reliably hold the torque once I strap on a turbo or two. AWD would be nice but way more stuffing around than I'm willing to deal with. This won't be a drag car so 2WD will suffice.

Yes I know it will be a lot of hard work, I've done enough engine conversions to know what I'm in for here! Realistically though it won't be very different to any other non-RB engine swap; an LS1 for example would only have the advantage of leaving me a bit more room to play with, but actually fitting the engine/transmission would be the same amount of work.

Anyway it's kind of good to know there aren't any other V12 R32's, I like the idea of doing something unique. :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3572410
Share on other sites

Norbie, you know its a good idea, do it >_<

I think it's a good idea too! My Century did 260rwhp on a dyno with an auto transmission and the world's most restrictive exhaust system (4 cats and SEVEN mufflers!) so even without forced induction it should make for a reasonably quick car. With a decent exhaust, manual transmission and a good tune it should be closer to 300rwhp. What does a stock GTSt weigh?

Also just to confirm, can anyone tell me what sump layout the RB20 uses? I've been told it's a front sump setup but I need to be certain of this before I make a move; the 1GZ is front sump and changing it would be quite difficult.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3573409
Share on other sites

~1260-1300kg depending on what year and who you talk to and yes, front sump.. good luck! sounds interesting ;)

Good times! My Supra weighs about the same and ran 12.49 @ 117mph with a bit over 300rwhp. If I could manage similar performance without forced induction I'd be pretty happy.

Is there a "top 10" list of NA Skylines somewhere around here? No doubt there's an LS1 monster which has already well surpassed those numbers by now, but it would be interesting to see all the same.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3573894
Share on other sites

  • 3 weeks later...
norbie you've defected from SF, your a double agent now lol?

from memory the fastest NA was some who used a VH45 and ran 12's while NA, then nitrous got him 11's, then 10's superchaged+NOS

I'm slowly infiltrating all car forums in the country. :)

12's should be pretty easy to beat with extra litres and cylinders.

Link to comment
https://www.sau.com.au/forums/topic/200775-v12-r32/#findComment-3606689
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...