Jump to content
SAU Community

Common... R33 Rocker Cover Gasket Leak

Gianni
 Share

Recommended Posts

Gianni Contributor

Gianni

Posted
Posted

Hi Guys,

I think the subject says it all but does anybody know where to get new rocker cover gaskets for a RB25det engine other than Nissan themselves? I rang Brighton Nissan today as I've been dealing with the guy there for years and he really looks after me price wise... well I hope he has, and he said that I'll be looking at $30.00 per side, there's actually 2, one for each cam but what I forgot to ask him was how much for the bolt seals coz they will also need replacing... no doubt.

I'm not to sure if the gaskets will come with the bolt seals but I'm guessing not... not 100% sure though meaning that there's about 20 odd bolt seals probably worth $3- $4 dollars each? it starts getting a little expensive! What do you guys think?

Does anyone know where to get new ones any cheaper with the bolt seals? Hope I don't sound like to much of a tight ass!

Thanks,

Gianni

Link to comment
https://www.sau.com.au/forums/topic/20106-common-r33-rocker-cover-gasket-leak/
Share on other sites
  • 1 month later...
JimX Grand Master

JimX

Posted
Posted

I don't think $33 is too bad. Mine aren't leaking at all, so I would think generally speaking they last around 8 years or more. That beats the hell out of Commodore gaskets which are about $10 but leak straight out of the packet :D

whatsisname Grand Master

whatsisname

Posted
Posted

I paid $26ea from Unley Nissan here in SA. I re-used the original bolt seals, no prob's so far.... if you ignore the fact that No:1 ringland cracked :D unrelated of course.

strutto Grand Master

strutto

Posted
Posted

Make sure it is leaking before you go to the trouble of replacing them...

Quite common to spill oil down the intake side when topping the oil up and over time the spilt oil will progress towards the rear of the motor looking just like a leaky intake cam cover gasket...

Clean the oil off with a rag and some degreaser and see if the leak comes back... Mine didn't...

If it's the exhaust side though, probably rooted gasket...

Just my opinion tho...

  • 3 years later...
RedLineGTR Enthusiast

RedLineGTR

Posted
Posted
Anyone know what the part numbers are? Also, would the washer be important. I cant find a dealer where i live that has the washers in stock. they've got the belts though.

I'd be keen on the part numbers as well, my r33 started to leak a bit if i dont let the car warm up...can this be done easily at home?? just unscrew the bolts for the rocker covers and replace the seals etc??

LTHLRB Grand Master

LTHLRB

Posted
Posted

my rocker covers are leaking aswell "aparently" the other workshop i was at changed them... cops ass!!!

how much for gen nissan rocker cover gaskets, i also need a gen nissan exhaust manifold gasket..

SteveL Mentor

SteveL

Posted
Posted
therepost-17300-1160253786.jpg you go

Those aren't the part numbers you need....the Nissan parts guy will probably just stare blankly at you. It's much better to have the full VIN of the car but here's what to do:

- double click on the empty box to the right of the one that says 'Part No'

- enter the first three numbers of the 'Part Code' shown in your list....in this case 132....and hit return

- FAST may throw up another box asking which model/year for the car (but rocker cover gaskets are pretty common across the range so perhaps not). If it does you'll have to select (click on) the relevent car/year line in the pop-up.

- the full PN's should now appear in the main window, along with some other info.

Hope that helps

RedLineGTR Enthusiast

RedLineGTR

Posted
Posted

Called Nissan Today:

Rocket Cover Gaskets..

Part No. 13270-58S01 (1x Each)

Part No. 13270-58S11 (1x Each)

Washers (Rubber)

Part No. 13268-58S01 (1x Set of 20 Seals)

Hope this helps. Rob

Screen dump for you :thumbsup:

untitled1ce0.th.gif

RedLineGTR Enthusiast

RedLineGTR

Posted
Posted

Oh and the price was about $30 bucks or so think it was $36 but under $40 each. They should have them for me by the next day :thumbsup: also found the part number for the rubber seals it comes in a set of 20 which will set you back about $2.45 each a full set is about $49.50/

Is there much to replacing them??? just unscrew the rocket covers and replace the seals?? obviously in a clean environment so no contaminants get in.

Cheers Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...