Jump to content
SAU Community

Recommended Posts

bolt in i think, going to look at it tomorow, wanting it to be legal

you will definately need to call your local RTA office and discuss the requirements for a bolt in cage, it may not be legal at all, even with it a bolt in.

you will need to get it engineered as well, so maybe call a local engineer to find out what they need to pass to give you a blue slip for it.

im going to be buying a half cage for my r32, ive looked in the diy/faq thread but cant find anything on installing them, has anyone got any pictures or have any information on how to install them

Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

post-10743-1200371107_thumb.jpg

post-10743-1200371125_thumb.jpg

post-10743-1200371145_thumb.jpg

post-10743-1200371163_thumb.jpg

Hey,

I have just finished putting a half cage in my 33..it may help..mine is road legal with a engineers certificate.

Scotty

YcopY

That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

That cage is bolted to the inner wheel arch!! and can also come into contact with the head in a crash!!! Your engineer is a very brave man (or stupid)

Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

mines bolted to the inner wheel arch. Is this no good???

chassis rail my friend...a lot less flex. An inner wheel arch is a single layer of thin sheet metal. Ive also see 1st hand how easily an inner wheel arch folds up in a crash.

Arent all bolt in cages like that though (to the inner wheel arch)?

Im with you about the head clearance, that looks pretty tight there!

Cheers

Ric

if your head can come into contact with the cage (or padding) its illegal...end of story...engineered or not.

so thats all bolt in?

is it now a 2 seater?

which state are you in? do you have any details on what was required eg . distance from head to bars, mounting point specs etc that you can share?

Yep its now a legal 2 seater, Im in NSW, i have to Code of practice for car modifications some where here on my PC, Pm me your email address and i will send it over to you.

Dirtgarage

yes its botled to the inner arch, as the cage was made up by the boys at bond roll bars this is where i was told it was to bolt to, it does have a dirty big bit of steel as a plate under it as thats what the COP for car modification states. But i do understand your point about using the chasiss rail. They are removable rears so i can change that.

I do agree the head clearance is a little tight in that pic but with the seat in its forward position (which is my driving position) it meets the clearance requirements just....

Cheers,

Scotty

is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

check the online cams manual. It was updated 1.1.08 to specifically say non-approved cages can only be used if the scruitineer for the event is OK with it, ie if you strike a dickhead they can ban you. they have been discussing this clarification in rules for years so watch out.

bond can provide the compliance details as long as they built it to the rules

is it a cams approved cage or not? bond know what they are doing, but if its not approved you can get knocked back by scruitineers at any cams event. And I don't see the point of a cage if you are not going to hit a track?

Duncan,

When i ordered the cage i told bond that the car was being setup to drift (competitevly) and this is what i was given. the cage is functional not for show...that would be just wankkie...

Im downloading the cams manual now so i will have a read through it.

Well..After having a read of section 6 - schedule j and re talking to bond it appears to be ok with cams..but im not 100% sure. is there somewhere i can take it to get checked?

Sorry to hijack this thread..

Edited by chippagti

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...