Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

i finally did it on saturday.

its good fun, you dont need to speed to enjoy it....just keeping the speed limit through corners was good enough.

it was very quiet for a saturday, most of the time was spent without a car in sight. Had a pie too. (hmm)

had to get get back onto the f3 at peats ridge, OP was closed.

cheers for the info.

p.s Liz - i'm just warming up!

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-3583433
Share on other sites

The Old Pac between the Calga Interchange and Sommersby hasn't been re-opened since the giant hole that swallowed a family. They've still got barriers in the way, although you quite regularly see people driving / riding around them. And, of course, there are residents down there.

If you do decide to go on that section of road (and SAU of course doesn't condone you driving on road that have been closed off), be extra careful. Due to the lack of traffic, nothing is blowing the leaves / twigs / brances etc off the road so its really dicey.

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-3583566
Share on other sites

  • 1 year later...

It might have been some time ago, I'm not sure. I was just testing out my new suspension; I hadn't been up there in a while.

Seemed as though it was mainly at the Cowan (South) end, but the surface also seemed better than I remember further up north too.

Edit: According to the RTA website they've just recently completed roadworks on this area from the Hawkesbury up to Kariong.

minus.gif Hawkesbury River interchange - Pacific Highway Road works Lanes closed: Both directions - 1 From: 8:30am on 31 August 2009 To: 3:30pm on 18 September 2009 RTA advice: Reduce speed, Exercise caution

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4834543
Share on other sites

"I'm pretty sure getting the air under the tyres would be somewhat difficult at the posted speed limit"

Yeah, i have seen a duke 675? launch it before... the way he overtook me, i wonder if he is still alive.

Anyway, he would have been pushing the speed limit to the extremes. :ninja:

No wonder the cops love that stretch of road...

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4837190
Share on other sites

Went down the a couple of weeks ago after not going for a while and Im loving the new smooth road!

Stage three is the pick of the lot! Awesome technical tight corners.. And uphill stage one..

But as said before.. just be carefull.. We all have seen or heard the stories..

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4838357
Share on other sites

i remember back in the days of first getting my licence of doing the old pac at least every week... in a 240 volvo, can anyone say bodyroll.

best fun i had on it was in my old MY00 WRX, it makes you understand why they sold so well.

the s14a was out of control in the corners, but more fun :)

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4839775
Share on other sites

I've lost count of the 3am runs on the Old Pac. :bunny:

Used to keep going till the sun came up.

When your heading south on the Old Pac and u hit the Berowa truck stop, the Bobbin Head run keeps the adrenaline going and then Thornleigh Maccas Via the Comenarra. :P

Edited by Alf
Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4840263
Share on other sites

I've lost count of the 3am runs on the Old Pac. :D

Used to keep going till the sun came up.

When your heading south on the Old Pac and u hit the Berowa truck stop, the Bobbin Head run keeps the adrenaline going and then Brookvale Maccas Via McCarrs Creek Rd. :)

Fixed :D

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4841034
Share on other sites

Bobbin Head is way too bumpy.

And I've heard the cops are still monitoring the Old Pac pretty heavily, although I haven't seen that and in the past few times I've been up.

I expect that, with summer coming on and the nights being warmer, we'll see more and more cruises going up at night...which in turn attract more and more cops.

Link to comment
https://www.sau.com.au/forums/topic/201167-old-pac/page/3/#findComment-4841068
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...