Jump to content
SAU Community

Recommended Posts

Hey I have a few parts laying around doing nothing, so I may as well sell em...

-r32 rb26 Head has a broken exhaust valve, ony a couple of little dings inside chamber that's all, no damage to valve seats guides etc, comes with all springs, buckets shims, cams and cam gears... so pretty well a complete head with a broken valve-$500, yes 500 dollars!

- R33 blockstandard bore. scoring in cyl. 4. needs boring, apart from that in great condition, no cracks in water jackets etc $300 yes 300 bucks!

-Rb30 had low comp(100psi) in cylinder number 4, block is suitable for twin cam conversion, has oil feed/drains and spot for idler bearing on front of block too, standard bore- $50 pick up only

Added parts

-Apexi air filter with 3" adapter- $50

-GReddy 60mm twin gauge pod, universal I think, brand new- $50

-2.5" stainless bend with BOV attached- $80

-2.5" stainless pipes, nice welds $60

-XF throttle body no TPS- $20

-2 Rb30e heads one complete with manifold etc, one just the head and valves-$offers

- Tighe rb26 regrind cams, not used by me, can supply spec sheet to interested buyer, last owner had them in a 700rwhp gtr -$200 cheap!

Location:Sunshine Coast Qld

Contact:PM, reply here or 0406016651

Comments:will post at buyers expense, sorry about the dirty head etc, that's how I got it...

pm me if you need anything else, I may have it here somewhere:)

post-23739-1200102217_thumb.jpg

post-23739-1200102302_thumb.jpg

post-23739-1200102371_thumb.jpg

post-23739-1200528563_thumb.jpg

post-23739-1200528596_thumb.jpg

post-23739-1200528632_thumb.jpg

post-23739-1200528700_thumb.jpg

post-23739-1200528750_thumb.jpg

post-23739-1200528796_thumb.jpg

post-23739-1200528955_thumb.jpg

post-23739-1200529061_thumb.jpg

Edited by craigy32

at the moment it has the crank and 4 rods in.. which were the good cylinders on the compression test... it has no oil pump or water pump either... I think its soldpending payment tho...

thanks

craig

i'll take the xf throttle body. please email me your bank details and price including postage and i will send it tonight.

[email protected]

Thanks,

Ariel

hey make an offer! otherwise I'm going to put it on ebay, and you know how cheap things go for on there :banana:

I'm sick of it taking up my workshop space!

craig

  • 2 weeks later...

Craig, I'll take the head mate @ 500 plus the valves you've ordered. Can you let me know exactly what is included via PM?

Happy to pickup too mate. let me know when is good for you. Cash as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...