Jump to content
SAU Community

Recommended Posts

You posted this on the 10th of jan

hey everyone i have a couple of questions i have a r33 gtst which i will be puting a to4z onto very soon i already have internals etc etc... im just unsure of wat sorta fuel system i need to install.... i wish to make 500-550. suggestions on size of surge tank size of fuel lines wat lift pump from tank wat pump afta surge wat fuel rail to suite greddy plenum.... wat injectors.... ne help is much appreciated thnx for ur time

Had you not already decided on the T04z??

Its probably the best turbo for your goal if you are still considering a big single.

This was posted yesterday

r33 gtst. in process of building motor have got three options.... rb25 block gtr crank h beam eagle rods je pistons fully built head...

rb26 transplant same as listed for rb25 but with the flow characteristics of a 26 head with cams and so forth.

or a 26/30 built bottom head with cams blah blah you catch my drift i just cant make up my mind and i cant find ne decent machinist that dont want my left nut for making the 26/30 combo or doing machine work i was for both rb25 /26 engines

This was the 11th of jan

im putting a gtr crank into my gtst block but im unsure if the twin plate from my gtst will bolt upto the back of the gtr crank does neone know if the holes line up from gtst to gtr

Hang up a second. You didnt wanna pay a machinist to do you a 26/30 but you bought a tomei stroker today when yesterday you had 3 engine options about what you were thinking about building???

Says in that first post you have built internals etc etc??

I dunno bout anyone else but im sure as shit confused about pretty much everything you've said???

Care to clarify exactly what you do and dont have, im not being derogative towards you but mate tell us what you do actually have truthfully and we can give you honest and experianced advise

Edited by Risking

I have the tomei stroker hidden in a GT block.

Turbo's are HKS GT RS's with Tomei Procams 270 @ 10.25mm with a ported head.

Fullboost (1.65 bar) @ 4800 RPM in 4th (give or take 100 RPM)

Wouldnt change a thing. At times i wish i had maybe 2530's but it really isnt that bad.

lol now its a 2.8 HKS kit.

Now, the most important question... skylinekid... are you 15?

And before you bag someone maybe you should read who you are replying to. Skylinekid didn't say he had a HKS. :P

im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

+1

yes i am also very confused as to what exactly he wants advice on.. which one of his 3 motors lol.

sometimes u just cant help retards :P

hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

Edited by skylinekid
im still wondering who in aus had a tomei 2.8 in stock and was open on a sunday for him to go buy it.

Yesterday he was tossing up a 26, 25 or a 30/26 now his sporting a new tomei engine!

ebay top bloke

even got the ones to run bigger lift

Edited by skylinekid
can you provide the ebay link for your purchase?

http://cgi.ebay.com.au/Tomei-Stroker-Kit-N...1QQcmdZViewItem

i havent fully ordered it yet ive email'd him to make sure its the right kit but yeh i just wanna make sure

im pretty sure its the non cooling channel kit tho

hey shane i know a good friend of urs so if i was u id watch ur mouth buddy....

im 20 i have a r33 gtst i was goin to go with th 25 head and block but wen i pulled it out and comtemplated everything i wanted big power with decent reliability the 25 block just wouldnt provide the right comfort factor that a 26 block would.... plus the reason i changed my mind about using the 25 i figure y waste money on an inferior head package.... dont get me wrong there still a good head but the 26 head is just far superior in flow characteristics.... do u undastand now ive just had a fair few mind changes lately as to where i wanna waste my hard earned money is that orite with u...

is it wrong for me to ask questions then realise that im doin the wrong thing huh enlighten me plz...

neways yes i figured i was gonna dump gtr shit into a 25 so i thought f**k it just get a gtr motor... makes sence to me

and yes to4z was my likely option i was just seen wat anyone else was gonna say

shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

shit eh, i know a good friend of mine too! :)

what makes the 26 block better than a 25 block? theres HEAPS of 25's making "400hp" and higher

also any form of stroker is massive overkill for "400hp", fark even i wouldnt do that! and im into overkill ;)

seriously, if u want to be taken with any form of seriousness, think before you post mkay

well for one read b4 u post.... i want 550 to 600 rwhp

is it still overkill

What size cams and what headwork are you 'planning'?

That Tomei stroker kit is only the 8 counter kit and the 'cooling channel kit' is actually only an extra option regarding pistons. Everthing else is the same.

Do you actully need a stroker? Plenty of guys are running rb26's with TO4Z's and are making the required power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
    • Run it in open loop for now, and drop the frequency down. This lowers the resolution and requires more duty cycle to do anything, however good to troubleshoot.
    • According to Josh, one of our local Americans, it seems the USA still can't get turbo systems quite right at a lot of places, so possible that they're not running great at all, but they've just not complained as NFI about getting it right...
×
×
  • Create New...