Jump to content
SAU Community

Recommended Posts

I'm about to install my sub/subs into the 34 when I've found a suitable amp and i'm tossing up a few options. I can install 1 or 2 10" subs and i'm looking for the most space saving install as I use the boot for groceries etc. One possibility I was tossing up was installing the two, one on either side of the boot in those "pocket-type' areas. Anyone willing to share pics of their setups so I can get some more ideas. I was also wondering if anyone was able to tell me what an approximate 'fabrication cost' would be for the setup i suggested done professionally?

Cheers

Yvonne

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/
Share on other sites

here is a pic of my sub + amp in a box (12" JVC active sub) along with my separate 2 channel JVC amp which is powering my DLS front

its a bit messy at the moment but only cause i just wanted that sub in!!!!!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3584608
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3586260
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587643
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:)

Would like to know this information too! :(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587878
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:P

Ive been quoted them from Maroochy Car Sound and Sound In Motion here on the sunshine coast. They are only moulded for left side. i guess something to do with it being in the way of things on the right side. Ive seen one moulded for a 33 and they take up fark all space.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3588538
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

post-9854-1200456448_thumb.jpgpost-9854-1200456523_thumb.jpg

heya bro.. that setup seems strangely familiar :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589165
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

Plenty of boot room but you cant exactly use it without something possibly poking through the sub! Needs a sub cover/grill to protect it then the boot room would be usable :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589371
Share on other sites

  • 3 weeks later...
there is a fellow on the GC that makes them for wholesale to shops. I can get hem as well but I'm not sure if he does a 34 though.

Reckon he would do a group buy on them?

Say 10 of each, r32 r33 r34?

Id be VERY keen depending on price

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3621521
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

post-31466-1202382468_thumb.jpg

post-31466-1202382558_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3631240
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

Keep us updated dude!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3632085
Share on other sites

  • 3 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...