Jump to content
SAU Community

Recommended Posts

I have a friend who has been building a car - an R31 Skyline, Rb30E 5spd. He uses coilovers from an s13 and some steering control arms etc from an S13 aswell. Trying to track down a stiffer rear swaybar.

Car runs extractors from the wreckers and a 2.5" exhaust, autobarn heavy duty clutch, Pod with CAI, new leads and plugs. Diff is a weld job, is the only dodgy part.

Was a cheap car to build (about$2k, its no D1 car but its tidy and registered) and makes enough power. Should be taking it out soon hey.

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3581890
Share on other sites

completely stock rb30e apart from extractors, exhaust and a pod filter, never misses a beat :D

exedy hd clutch, minispooled 3.9 diff

s13 front coilover conversion with jic 9kg fronts, s13 tie rod adapters, adjustable castor rods

rear is s13 7kg teins with cusco hr31 top hats (bolt in perfect then)

whiteline swaybars front and back, and adjustable panhard rod

got some r32 front brakes on for good measure

heaps of other small shit, but its certainly not a bad car to slide considering how much it cost. i drive it every day too

non turbos great for archerfeild, will be going there again this wed. it struggles at QR though, but its all about the clutch kick

Dynoday2nddec07038.jpg

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3581908
Share on other sites

some sliding pics

IMG_0123_1280.jpg

P1000299.jpg

P1000311.jpg

P1000300.jpg

rb30s are pretty good drift motors mainly because they are cheap as, but also because they have great midrange. unlike a rb20 you can rev it to 3k and drop the clutch and get wheelspin. only shit bit is they have no top end, dont rev hard and have a gay limiter

Edited by racsov500
Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3581912
Share on other sites

now i have to get a photo will take one 2morrow after work and post her up :)

mines completly stock besides an apexi pod and hopefully the gtst axles and viscous diff will go in ok this wednesday...fingers crossed :D

Edited by Caza
Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3581914
Share on other sites

nice work guys.

nick, i agree QR is a very power demanding track. even for circuit work you need a fair bit of power to push through the corners.

i do a little bit of motorkhana stuff and i agree the clutch does cop a fair bit of abuse, but contrary to what everyone says about having buckets of power to 'powerslide' a corner, i have found suspension setup and technique is more important.

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3581932
Share on other sites

I been pondering about selling my GTS4 and buying a boro S13 for drift/girp application..

I care too much about my gts4 to take the risk of tire walls etc. etc. etc. So I ifugre.. if I dont care so much about it.. I could go balls to the wall..

Any idea?.. should I take the leap?

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3585404
Share on other sites

i do what i can with an auto n/a 33.. im so considering selling to get a manual of something.. so much better but ill lose so much money.

only mods on my car are extractors, 2.25" exhaust, pod and working on my CAI, need an LSD :< and some better springs its like a boat atm

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3585580
Share on other sites

they are 235's and not on belts but they resemble some sort of home made drag slick.

i should really replace them but.. im poor :blink:

try to make tyres a priority... they are the only thing keeping you on the road regardless of how much/little power you make. federal 595 is a well priced good performing tyre, check em out.

Link to comment
https://www.sau.com.au/forums/topic/201566-na-drifters/#findComment-3594568
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...