Jump to content
SAU Community

Recommended Posts

Awesome news.

There will actually be some real market forces involved in 2nd hand r35 GTR's in years to come, instead of being dictated by the )probably small) number Nissan will bring in.

There is probably only going to be small numbers brought in by Nissan now as everyone is going to know that since these can be brought in from Japan the value of these cars are going to die in the ass much like the R32 GT-R so your investment losses are going to be huge. Which means only the real die hards will buy them now.

In many ways I personally find that disappointing.

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

There is probably only going to be small numbers brought in by Nissan now as everyone is going to know that since these can be brought in from Japan the value of these cars are going to die in the ass much like the R32 GT-R so your investment losses are going to be huge. Which means only the real die hards will buy them now.

In many ways I personally find that disappointing.

It's kinda of a double edged sword.

If you can get the "grey" import cheaper than your intial investment is less, however if they were only sold by Nissan then the prestige and mystique would hang around much longer and in turn, as you said, keep the value up.

For most people grey imports is the better bet as it means once they drop in price they would be accessible to more people.

I had heard on the rumour mill that Herman from Envy Imports was importing them and doing the SEVS compliance. Being local to him is nice, might pop down once he has an R35 in stock and have a geez :D

At least the rumour is confirmed. Time to start saving. Hah

So many variables here, hard to say. We calculate it at about that (actually $125k) if valuing 8 mil FOB and 4k for compliance. Who knows, really, cause no one has compliance yet. Also, who knows what the exchange rate will be in 2009.

There's another thread about the 18-month window that Nissan has to import it themselves....see http://www.skylinesaustralia.com/forums/Un...R3-t202581.html for more info. Basically, if Nissan brings them in full volume (before 18 months expiry date) no one else can. And until Nissan releases what their intentions are, everyone else's hands are tied.

cheers,

david @ carizma

according to geoff at prestigemotorsport, new example will be around the $120k complied, while second hand example will be around the $100k complied.

Early 2009 is the expected availability date

i was under the impression that any current compliance plate would only be for the new model, or under 10 000 kms..

any only be good for models up to the date nissan brings them in... much like the s15

?

Sure, but Nissan hasn't brought them in yet full volume, so it depends on what they do.

i was under the impression that any current compliance plate would only be for the new model, or under 10 000 kms..

any only be good for models up to the date nissan brings them in... much like the s15

?

So people know with New Car under SEVS is under 300 klm's only to be deemed new and in the US they are getting $20,000 US over list when placing an order.

You will not get one from the auctions under 9,500,000 Yen FOB and people quoting 7,700,000 becoming 8,200,000 FOB it is way off and actually a joke.

Edited by Guest

agreed! I have bought a couple and it's not easy, or cheap. very limited supply from nissan and lots of hassle for exporters to buy one new (compared to just buying any old car at auction) means anyone would be mad to do a regular FOB as the number they can buy is very, very limited.

tell me about it. and of course if you are buying a new car from nissan they have been instructed NOT to sell to exporters. so they wont like it if you order more than one, which is hard enough anyway as you need a parking spot for it, and if you don't have enough in your house you'll need to rent one, within a certain radius of your house, and it has to be big enough to fit the car and the police will check this to make sure you are legit. all big hurdles and all add time/cost.

been watching the R35's at the auctions in the last few weeks and the ludicrous prices being demanded for them have dropped to market value of about 8 million yen to 9 million yen. That said, that's just the auction price... FOB would be a lot more.

been watching the R35's at the auctions in the last few weeks and the ludicrous prices being demanded for them have dropped to market value of about 8 million yen to 9 million yen. That said, that's just the auction price... FOB would be a lot more.

Yes by the time we will be able to import them the market price will be around 6mill the depreciation is huge on new cars in Japan, so another reason to wait.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...