Jump to content
SAU Community

Recommended Posts

Hi guys,

New to the site and stageas too, firstly - fantastic wealth of information you all have collated here - its a credit to you.

Secondly, despite searching I cant find ANYWHERE that supplies different front grilles for the series 1 RS4. I am due to get a stagea soon and I just really dont like the front grille.

Can anyone show me websites or more importantly direct me to a contact that has aftermarket grilles?

Im in the UK if that makes a difference and would love to see some pics!

Thanks all!

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/
Share on other sites

check out takeros(.co.jp I think - try a google search) and Masa motorsports (once again not sure of the exact site name). There will be others - just make sure when you search, you use WGNC34 and "body kit' or 'front grille' or 'face' etc when you search.

Give it a few hours, and the guys on here will have a heap of replies with more detailed info than I can provide!

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3593547
Share on other sites

check out takeros(.co.jp I think - try a google search) and Masa motorsports (once again not sure of the exact site name). There will be others - just make sure when you search, you use WGNC34 and "body kit' or 'front grille' or 'face' etc when you search.

Give it a few hours, and the guys on here will have a heap of replies with more detailed info than I can provide!

Fantastic - I just think the new grille will massively improve the look of the car.

I also want some clear repeaters for the front and side - can anyone help with that?

Thanks again!

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3593554
Share on other sites

yeah - what sort of grill do you want exactly? Do a search on yahoo japan and have a look to get some ideas about what is out there. As for the indicators, the front ones are exactly the same as the nissan maxima (use the search function for "clear indicators" ) and the side repeaters are the same as a LOT of different vehicles. I have seen everything from Pulsars to commodores (4 door vauxall monaro to you lads in Pomgolia) you are pretty much only limited to what you can wire in and what will fit in the hole, but there isn't a lot of difference between cars. My choice is the N16 pulsar ones tho.

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3593648
Share on other sites

well, mine had a turbo grill with an NA motor (originally) :P

Its just one of those personal taste things I suppose. There are a few RS Four owners here in Aus that want to put NA grills on.......

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3593844
Share on other sites

Thanks for the info on the repeaters :D

RE: the grille...

What I have

front.jpg

What I want

stagea_front.jpg

Well I got the NA grille from Rob"s wreck caus my stock S1 grille did not have a double Unicorn on it

Maybe I am Stealthier caus I'm turboed?

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3594862
Share on other sites

If you weren't on the other side of the world l'd def be interested in swapping grills!!

Hey fuzzy, you should consider it, the postage isn't that bad.... might be way cheaper than trying to find one here or in Japan. Especially if you two swap!

PS I like the NA grill too...I have the Dolphin..... it is one BIG hole..... and no badge fits!!

Edited by Appealing
Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3600028
Share on other sites

Hey Gareth

i got one of those grills man should come round and check it out

dunno if the misses will let it go though but worth a try

Now thats very tempting!! I'll let u know ... as l'm seriously thinking of doing that and changing my kit.

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3601869
Share on other sites

ARGGHHH ... thats what l want!!! I prefer the n/a grill to the turbo one.

+1

I have the turbo grille

the NA grill looks best

Dolphin grille sucks arse IMHO (looks de-ghey with all the bits showing, such as radiator, auto oil cooler (aftermarket), horn(s), radiator air guide (aftermarket))

Id rather NOT see all those bits from the front with the Dolphin grille

lol

:)

Link to comment
https://www.sau.com.au/forums/topic/202410-front-grilles/#findComment-3602790
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...