Jump to content
SAU Community

22" Forged On A R35.... "droooooolsssssss'


Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

They look pretty damn good IMO, even if they're not as functional as factory items they can show what the r35 can look like. The stock r35 is pretty bland in comparison.

All you jdm jocks are just too hardcore, at least the Americans are contributing in someway to aftermarket parts and development, what has Australia done...

New commodores are stock with 20s.

no they're not

Yes, VE Commodores can be optioned with 20" Wheels standard from the factory.

See for yourself: http://www.holden.com.au/www-holden/action...6&bitmask=1

man, some people don't read before they post...

so in conclusion, i was right

Well while you are so busy being "right" could you enlighten us all as to the performance reason for running 20" wheels?

There's a performance reason why they went for 20's

p.s. LOL at Holden 20x8.... The cheese factory called, they want their cutters back. :(

Don't worry, this topic sort of died already once people started talking about Commodores.

But believe it or not, my avatar picture is from a recently released CD of Japanese love ballads. There is the remote possibility that they already have shirts available!

kamuriki2006-img600x450-1182764126dscn3458.jpg

http://wmg.jp/r35/

Edited by Laurence

unsprung wieght will still effect accell... ie more wieght more power to balance the same power to wieght ratio... wieght around a corner... self explanatory... wieght when slowing..... ... ok ... you put hte foot down and your bigger powa gets you up to speed.... oh shit you have to ease of and slow down to take a corner... as opposed to ending up in the wall and dieing painfully.... hmmm lift off oversteer.... nope nope.... more like understeering puss going for anchors and finding no ground.... coming into corner to fast... understeer of track into dust... wait for truck... woojoooo.

face facts....

This is boner worthy....

they are of desktop size >;P

since the GTR was built as it's own platform... why cant it look this good, be a small chunk heavier and make the same power it does now.... hell keep the AWD system and come in less than 1400 kg max... preff 1200 max but unlikely. MORE POWER is whats needed for these beasts!

post-22883-1202958149_thumb.jpg

post-22883-1202958176_thumb.jpg

post-22883-1202958200_thumb.jpg

Edited by gts-4 dreamer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...