Jump to content
SAU Community

Recommended Posts

Hey guys & gals - need some advice.

Just got my car back from Revzone today - the guys did a mad job in fitting the guages, and fixing most of the faults (has to go back for abs and aircon work though). However, the mechanic - justin - said that my tyres are not good enough for track work. There is plenty of tread, but on the fronts, the inside of the tyres are wearing out. How much of a problem will it cause (considering that the track day is part of the Driver Dynamics training)?

I heard that I cannot take it to the limit (which i wasnt planning on doing) and that if its raining it will probably be cause problems. The car is already moving towards the right side (very minimal though) when I tested it out at a car park earlier tonight.

The first time i cancelled a track day like this was because there was problems with the car, the second time i cancelled it was because the workshop i took it to didnt do any work on it - hence car was a disaster waiting to happen. And I dont want to cancel this one cos Im dying to go to the track day (mind you, I have already paid a deposit for the march one - but thats ages away :D )

Anyway, any advice would be greatly appreciated :)

cheers!

Link to comment
https://www.sau.com.au/forums/topic/204880-tyre-condition-for-track-work/
Share on other sites

worn street tires are better than new ones for track work... unless they are down to the canvas you should be fine

if its raining and they are pretty bald you will have problems, but I assume if there is standing water on the track and its your first time out you would just be tippy toeing around anyway

good luck and have fun!

worn street tires are better than new ones for track work... unless they are down to the canvas you should be fine

if its raining and they are pretty bald you will have problems, but I assume if there is standing water on the track and its your first time out you would just be tippy toeing around anyway

good luck and have fun!

Thanks for the reply man - yeah they are not bald, but there is more wear on the insides - got me worried when everyone is saying its best to get roadworthy tires.....

Im still awaiting reply from Kev though - dont want a repeat performance of last time where there is oil all over the track :)

Wear on the inside won't be a problem on the track cos if your cornering like you should be (quickly!) you will be using the outside of the tire anyway... even if your car is lowered there won't be sufficient negative camber (unless you have a/m camber adjustment) ... most street cars scrub the outside of their tires at the track

how many kays have these tires done? maybe post a pic of the tread or email it to Kev, he will be able to tell you

I know your pain, last time I was at one of Kev's Sandown days I got the death rattle and had to push the car outta the pits... there was just sooo much track and so little cars I got carried away, probably should have fit a cool down lap in there somewhere!... oops hehe... ah good times

Wear on the inside won't be a problem on the track cos if your cornering like you should be (quickly!) you will be using the outside of the tire anyway... even if your car is lowered there won't be sufficient negative camber (unless you have a/m camber adjustment) ... most street cars scrub the outside of their tires at the track

how many kays have these tires done? maybe post a pic of the tread or email it to Kev, he will be able to tell you

I know your pain, last time I was at one of Kev's Sandown days I got the death rattle and had to push the car outta the pits... there was just sooo much track and so little cars I got carried away, probably should have fit a cool down lap in there somewhere!... oops hehe... ah good times

yeah man, i just got pics of the tires - will be emailing htem to kev. The tires have been on since I purchased the car, which was in Feb13th 2006 - so they are probably due for change - but still have heaps of tread on them.

Its a crap feeling when you have to push the car out of the pits to the front of the gates.....but at the same time i was glad that the engine didnt need a full rebuild :O

However, I have been shit scared about taking the car to the track cos its been out of action for so long hehe

P1020604.jpg

P1020603.jpg

Are those RE01s? If so you'll be fine...

Are you the guy that had his sump plug come off at the track last year and left a trail of oil all over the track?

those are re01s.

yeah im the "sump plug" guy :D

Just heard that it will be raining tomorrow too ;)

dont take everything you hear as gospel. you know if your really going to be pushing the car to the edge. then i might say yeah go get some new or decent 2nd hand tyres that will provide grip. though if they are really old tyres they might feel ok in the dry but in the wet if u dont have tread to disperse the water they will feel worse than they should be.

the ones in the pic are fine. they are not at the limiter markers so drive on. or drift on them :thumbsup:

next time out get a new set and u will be set.

dont take everything you hear as gospel. you know if your really going to be pushing the car to the edge. then i might say yeah go get some new or decent 2nd hand tyres that will provide grip. though if they are really old tyres they might feel ok in the dry but in the wet if u dont have tread to disperse the water they will feel worse than they should be.

the ones in the pic are fine. they are not at the limiter markers so drive on. or drift on them :cheers:

next time out get a new set and u will be set.

actually yeah, the tires went good today - even in the wet, they performed well. I was very very happy with them - but they still need to be aligned and balanced.....

But the thing is i didnt push the limits - i think the dry track i was doing maybe 70%, the wet i was doing 50%?

either way, i was happy with them overall :ninja:

all good :)

did they have a little comp at the end of the day?

nah not a comp as such, but they put us learner babies with the track specialists - and that was an interesting experience. There was always someone fast behind me and that was daunting.

but atleast I can say that my car pulled away from a Porsche.................................... Boxster :D

I was speaking to this guy who did Drift courses and stuff in his 200sx - he said I should perhaps look at getting better performance tires next time. I think he mentioned S02's and RE01R or something......though he was running bridgestones at the front and falkens at the rear.....

The other thing that I need to look at is getting bigger brakes for the fronts and coilovers (i think my rhf suspension is wearing out)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...