Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Skizo,

I need to order some parts form Nissan to fix my rear axle clicking noise and have the following parts from a US site.

Any idea if these are the same numbers I can go to Nissan Aus with?

43210-AL505 Bearing Assy rear

39211-73L00 Axle Outer Joint Assy

39241-73L28 Repair kit, Duct boot outer

Cheers

Bobby

Hey mate,

Can only find full details on the first part. The other two it actually does accept the part numbers but I can't pull up any details on them. Not sure what that means as I can't read Jap. Best to call Nissan spares with those numbers, they'll tell you if they are available.

Here's the section you're looking at anyway:-

post-2302-1207890340_thumb.jpg

Hey mate,

Can only find full details on the first part. The other two it actually does accept the part numbers but I can't pull up any details on them. Not sure what that means as I can't read Jap. Best to call Nissan spares with those numbers, they'll tell you if they are available.

Here's the section you're looking at anyway:-

Thanks mate,

That's the part. Wanted to make sure that the US part numbers are the same and they seem to be. Now to give Nissan a call :-)

Cheers

Bobby

skizo,

from the FAST will you be able to check the part number and if the cruise control button can be purchased separately or comes as a set with the audio buttons?

it's the one numbered #5 below.. the right hand side. Thank you!

3840210.gif

I found it, but where there is normally a part number there is a star and some Japanese next to it. Translation please? Might be in another section. Who knows where the other Cruise Control modules are located/look like and I'll take a look.

Oh and who wants a factory MOMO steering wheel? :D

post-2302-1208310550_thumb.jpg

post-2302-1208310560_thumb.jpg

post-2302-1208310575_thumb.jpg

post-2302-1208310584_thumb.jpg

I found it, but where there is normally a part number there is a star and some Japanese next to it. Translation please? Might be in another section. Who knows where the other Cruise Control modules are located/look like and I'll take a look.

Oh and who wants a factory MOMO steering wheel? ;)

do u have one? All the ones I've seen have the part woodgrain handle..which I'm not keen on.

run this VIN - factory momo wheel with airbag.

NM35-319191

seee if there are SWC controls for it.

the deviation on the cruise buttons is the radar cruise vs std.

Here are the options that came with this particular one.

Looks like all the part numbers and SWC options for these cars are the same numbers as the V35 one I posted above.

post-2302-1208470268_thumb.jpg

  • 2 weeks later...

hi skizo,

i have a request for you if you have time..

can you do a search for a replacement 2003 coupe seat?

i'd be interested to see i the seat is different between the normal coupe and the 70th anniversary coupe that had the heated seats

what i'm really trying to find out is if the seat is the same or different and thus if the normal seats have the heaters already installed in them or not

i've just come across some info on G35driver that apparently the non-heated seats in the USA were all pre-installed with heaters in them as there was only one type of seat that could be bought, thus making the heaters work was simple wiring :down:

cheers,

Warren

hi skizo,

i have a request for you if you have time..

can you do a search for a replacement 2003 coupe seat?

i'd be interested to see i the seat is different between the normal coupe and the 70th anniversary coupe that had the heated seats

what i'm really trying to find out is if the seat is the same or different and thus if the normal seats have the heaters already installed in them or not

i've just come across some info on G35driver that apparently the non-heated seats in the USA were all pre-installed with heaters in them as there was only one type of seat that could be bought, thus making the heaters work was simple wiring :D

cheers,

Warren

Do you have a link Warren?

I was reading G35driver only a couple of days ago about this, and I think it was stated that heaters were not installed on all seats. Would love to find out.

Thanks mate.

I can tell you that teh wiring is there for them. both under the seat and in the centre console. dont have time to rip a seat out ( I have two cars here now) to prove the seats.

I can tell you that teh wiring is there for them. both under the seat and in the centre console. dont have time to rip a seat out ( I have two cars here now) to prove the seats.

Thanks for that Chris. If possible would be great to get it working.

Hopefully as easy as Warren said.

Sorry guys, lifes been a bit hectic for me recently. So i'll catch up when I can.

Just wanted to let you know that I got my hands on a recent version of the US version of the program, so it has all the G35 data in there, so can actually understand some of the writing now! :P

Some part numbers are the same, others are not.

This one is available for you too if you know where to look. Don't ask me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...