Jump to content
SAU Community

Recommended Posts

i kno a lot of this is adelaide, anyone spot anything in murray bridge at all!? I just moved there n is wondering if there are many other liners down that way...? cheers!\

ps: i drive my silver 32 gtst...gtr bodykit etc... later

I reckon sambo33 is out your way with a nice black 33.... correct me if I am wrong...

Well firstly I spotted yesterday a yellow 32 gts't down at moana at around 6 with 2 blonde chicks in it, very nice looking, car wasnt bad either.

Also yesterday a blue R34 GTR with blue plates - BNR34, stock, but oh so sexy.

Also today on goodwood road coming home from work a dude and a little boy on a 'posty' sorta bike with no helmets being chased by a bike cop, pulled across infront of a silver R33, dude must've been s**ting himself with a bike cop coming across infront of him. They stopped after that in some place along there, sucked in! :P

Edited by GTR-32
I reckon sambo33 is out your way with a nice black 33.... correct me if I am wrong...

hey Martin, i grew in in murray bridge, but ive lived in the city for a bt over a year now.

R32 kid, theres a few skylines getting around down there that i know of, not sure if any of them are on here though?

Spotted a White R33 with bronze rims at the Elizabeth Autobarn had a bloke wearing the traditional flanno with about 6 kids starring at it. Hell sussin them out i probably looked like a nuttr going round and round the roundabout multiple times

i havent been seen for ages im sad now and i have seen a black 32 on south road heading south after 5pm poor thing stuck in traffic all the time

Seen bunny, slydn and mobies at bunnings

Thar ye go bunny ;P

-D

spotted matty cruising hindley street at about 11 pm.

and was cruising next a nice dark coloured 32R (qld plates) down anzacs, driver was a cool bloke, gave it a bit of a boot.

Spotted the GTAutosound 34 today just past Flinders. Rocked up next to it in my ride and had a little squirt... would have looked and sounded tough I imagine... did from where I was sitting anyways :banana:

Haha, it's nice eh Steve? Legal too, lowest you can go. Gonna get that done to mine :banana:

Also forgot to mention I spotted PAULY today at about 4ish just off Main North Rd. Waved at ya buddy but don't think ya saw me

If you are talking about the rears then yes, that would be illegal tint but I think that's how it came from factory as it passed compliance, however, the front window tint is lighter and is legal

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...