Jump to content
SAU Community

Recommended Posts

Spotted OH SNAP down the bay today.

Also black Celsior with plates:

CNT

ALNK

I don't get it :wave:

EDIT: That was the back, now I put it as CNTALNK I see Centrelink, I get it now.

Edited by Thomasino
ferrari 599 in north adelaide at about 8pm, f**k, seriously good looking car.

i see your ferrari 599 and raise you what im going to call (even though its not) a ferrari 430 on mcintyre, way cooler looking than the 599 im my opinion, although i believe the 599 has more gusto v12

looked like this but the 1 without the round taillights

http://www.ssip.net/upload/ferrari-f355-be...a-side-1_64.jpg

Edited by Inline 6
i see your ferrari 599 and raise you what im going to call (even though its not) a ferrari 430 on mcintyre, way cooler looking than the 599 im my opinion, although i believe the 599 has more gusto v12

your prob thinking of the Ferrari Testarossa. i see one of them around the golden grove area all the time. its one hell of a nice car.

i see your ferrari 599 and raise you what im going to call (even though its not) a ferrari 430 on mcintyre, way cooler looking than the 599 im my opinion, although i believe the 599 has more gusto v12

looked like this but the 1 without the round taillights

http://www.ssip.net/upload/ferrari-f355-be...a-side-1_64.jpg

I Get to see an F430 everyday parked in my neighbours garage... they are stuck up tosser ferrari's :cool: If I was rich atleast I would have taste and buy something cool like a Testarossa :D

Today I spotted a Silver R34 GTR Vspec II in a carpark by chinatown.... I think its plates plates were VSPEC II .. or something along those lines... there were a couple of R33 GTST's in the carpark aswell but looked pretty stock.

I Get to see an F430 everyday parked in my neighbours garage... they are stuck up tosser ferrari's :cool: If I was rich atleast I would have taste and buy something cool like a Testarossa :D

Testarossa cool? have you driven one ?, I drove my mates fully tricked out Konig twin turbo black model in aspen colorado for a month, looked really hot, but unstable with that much power(close to 900 dyno'd HP at sea level). and touchy engine didnt like a good flogging at high altitude, , plus being tall you dont fit for shit. gear shift is behind my kneee when i drive it.

not a fun car to drive ????, scrapes on every driveway. but at nearly $500,000 US invested in it, it does pull chicks like a money magnet..lol

its a look at me Im a WANKER car, but for a driver give me a GTR, Austin martin, GT3 or something like that.

his car must be one of the nicest Testarossa in the world, PS. he is very very rich and single for all you materialistic girls out there, 35 yrs old.lives in many locations worldwide.

sorry this isnt the dribble thread...lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
×
×
  • Create New...