Jump to content
SAU Community

Recommended Posts

seen a white stage sitting in U PULL IT today.

was nurntout and getting wrecked in the yard. is already missing the motor box and most things in engine bay. missing the suspension and the front rotors and brakes. interior burnt but rear hatch all good and rear lights perfect as well as rear bar.

go get it ppls

also spotted mudhntr parked on east tce last night...also 2am this morning some fkn idiot in an orange BA xr6 falcon (ON GAS!) was tailgating me and then overtook me on oakridge rd doing about 120+...will be reporting you to the police

Edited by stolen-gtr
also spotted mudhntr parked on east tce last night...also 2am this morning some fkn idiot in an orange BA xr6 falcon (ON GAS!) was tailgating me and then overtook me on oakridge rd doing about 120+...will be reporting you to the police

spotted you at vilis. >_<

i dare ya to do a skid. :)

also spotted mudhntr parked on east tce last night...also 2am this morning some fkn idiot in an orange BA xr6 falcon (ON GAS!) was tailgating me and then overtook me on oakridge rd doing about 120+...will be reporting you to the police

was at the stag with a few friends

also while i was there i saw our friend in that gay blue 34 with the chromies. thinks its cool to chirp second at 5:30 on a friday >_<

Just want to go back to the Phat34/Morpowa allegations.

I was not there but I feel that Simon has been possibly treated a little harsh in a couple of posts.

I have run shows in every state of Aus and I have has Eddy Tassone with his 1000hp PLUS Cars with us in every state.

Believe me , you can strap those things as hard as you want and when you start to make that sort of torque it will come straight up on the rollers just as Phat 34 did . . and stretch the straps to breaking point.

There is a couple of Dyno passes on youtube from our show in Perth earlier this year - Search "Shane's Twin Turbo GTS at PSR Show" and get a look at the Dyno passes of another Tassone built gem . . it actually breaks the straps and leaves the rollers in one pass.

My staff had stapped that car to within an inch of its life for safety - and guess who was driving - Simon.

Simon had nothing to do with the strapping on these passes as my staff are totally responible for safety.

Food for thought for some of the Keyboard Critics out there . . .

Maybe someone that is sharper than me can post the couple of You Tube Vids from Perth on here for all to see.

Then the Critics may get a better understanding of the situation

hahaha i wanted to see VX come screaming off the dyno >_<(not really)

Thanks Madaz

There is another Vid in there from the back of the Dyno that will explain the Power/Torque result even further as the straps get the Big stretch and eventually break!

Spotted Luke & Flicky tonight along with Nightcrawler, Munro & Matty.........don't know where Heslo & Madaz got to.

John Munro's 6.3 AMG is just ridiculous man.......very jealous :D

Happy birthday Luke & thanks for the invite.

Spotted Luke & Flicky tonight along with Nightcrawler, Munro & Matty.........don't know where Heslo & Madaz got to.

John Munro's 6.3 AMG is just ridiculous man.......very jealous :D

Happy birthday Luke & thanks for the invite.

Yes apologies Lukey boy, I totally forgot about the missus' work xmas party and I couldn't get out of it. Tried to get down in time but ended way too late. Hope you had a great one mate

Spotted BIT SUS in the GTR today on Unley rd. I was the guy in the Bright orange ceffy pulling out of a side street.

hehe figured it would be someone on here :D

Nice Ceffy - certainly stands out!

Spotted today at around 3-4 in the arvo a white ceffy with boostworx stickers and a loud twin flute, also a r31 and silver r32 with it Behind Parafield Bunnings, followed u guys abit then left lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...