Jump to content
SAU Community

Recommended Posts

Spotted some moron on top of the Stagea last week out front of Coromandel Place Substation in the city. He was some maintenance guy wanted to work on the air con so he put a ladder on top of this car.

Minutes later a big dood with tatts came out yelling. Any one from here?

post-52024-0-32058100-1298268051_thumb.jpg

standard for a lowered commo.

spotted james' 'R on north east road at about 9:30, never thought id say this... but put the works back on. gtc's dont really suit.

then spotted W4NTED chucking a lap on hindley at midnight.

then james again on the way home. quite amusing. :action-smiley-069:

lol their my spare set. should see his tyres on his works lol

Yeh saw him down seaford driving like a tool aswell..

Silver, roh wheels, red and white plates, with a snow plow as a front bar lol

Also seen a dark blue 32gtr down hindley sat night pulled over by the cops.. Wonder if he got a yellow canairy?

Yeah, that was me, nope no canary :D was defected Thursday morning for bald tyres, got them Friday and off defect, all he checked was tyres and rego, lucky for me he didnt check under the car, got drug and alcohol tested aswell.. I pulled out and he pulled in a VS commodore with P plates, definatly after P platers.. Guessing that was you walking past that said you own a GTR?

Spotted some moron on top of the Stagea last week out front of Coromandel Place Substation in the city. He was some maintenance guy wanted to work on the air con so he put a ladder on top of this car.

Minutes later a big dood with tatts came out yelling. Any one from here?

What a knob! Hope he copped it real good from the owner! :mellow:

Spotted some moron on top of the Stagea last week out front of Coromandel Place Substation in the city. He was some maintenance guy wanted to work on the air con so he put a ladder on top of this car.

Minutes later a big dood with tatts came out yelling. Any one from here?

I would have punched the f**kwit in the head

  • Like 1

yeh i would of gone mental if that was my car! as if that guy actually did that... pinch.gif

Yeah, that was me, nope no canary :D was defected Thursday morning for bald tyres, got them Friday and off defect, all he checked was tyres and rego, lucky for me he didnt check under the car, got drug and alcohol tested aswell.. I pulled out and he pulled in a VS commodore with P plates, definatly after P platers.. Guessing that was you walking past that said you own a GTR?

yeah man that was me, would of chatted a bit more but you had a cop talking to ya lol

ya GTR looks nice nd clean mate.. at first i thought it was black haha

haha when arnt they after P platers in skylines, luckily im on fulls.. still get hassled tho

yeh i would of gone mental if that was my car! as if that guy actually did that... pinch.gif

yeah man that was me, would of chatted a bit more but you had a cop talking to ya lol

ya GTR looks nice nd clean mate.. at first i thought it was black haha

haha when arnt they after P platers in skylines, luckily im on fulls.. still get hassled tho

Thanks mate, Yeah, was shitting myself at that point haha Going to regency would not be good.. and nar, i see too many black Skylines around, wanted something you dont see very often.. I've got another year before i go to my P 2's so going to be getting hassled for awhile yet..

Spotted some moron on top of the Stagea last week out front of Coromandel Place Substation in the city. He was some maintenance guy wanted to work on the air con so he put a ladder on top of this car.

Minutes later a big dood with tatts came out yelling. Any one from here?

This is the stag that I meant haha.

It's Sneddy's car!

Lauren just rang him and apparently the guy who is on top of his car did everything possible to not damage the car. He put flat boxes down on the roof and wasnt actually on the car he had a ladder either side with a plank across the roof not touching. The car is fine and still immaculate and the guy on the roof is in one piece.

The Stag is for sale if any one is interested.

Edited by Import S13

Thanks mate, Yeah, was shitting myself at that point haha Going to regency would not be good.. and nar, i see too many black Skylines around, wanted something you dont see very often.. I've got another year before i go to my P 2's so going to be getting hassled for awhile yet..

Haha, yeh goin to regency is too much of a head f..k, too many things to change back lol

Yeh well i didnt see any black GTRs till i got a black one, most were white and grey hah.. But there aint many blue ones made, werent they a special order colour?

To be honest once i drove a GTR it didnt matter what colour it was, as they are just an awesome car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...