Jump to content
SAU Community

Recommended Posts

So i need to replace the gaskets on my TD-06 L2 20g to finish off the rebuild on my RB20.

Im having trouble finding anyone that stocks or can get a hold of the gaskets and just wondering if anyone has replaced theres before and who did they go through???

I need:

manifold

manifold to turbo

turbo to dump

Any help appreciated

Cheers Ben

PS: i know this is now in 2 sections but had no replies so far and i know guys like Troy, James and Silvergtst are running the same turbo :D

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/
Share on other sites

I had the biggest prick of the time trying to find a manifold to head gasket to suit RB20/25.

I have the part number and called NISSAN and they want between $103 - $115 which I thought was a rip off so ended up ordering it through RHD JAPAN.

About $71 incl air mail express delivery to my door, which is pretty good considering the prices here.

Part #14036-21U00

https://www.rhdjapan.com/home/products/prod...roduct_id=3277#

As for the other gasket any good local exhaust shop should have them.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3647717
Share on other sites

i got a few, i found :ninja:

sorry bout other day comp dropped out :(

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649419
Share on other sites

i got a few, i found :(

sorry bout other day comp dropped out ;)

email me your addy and i will arrange to send them $30 for the two trust ones. Call MD Spares in moorabin for your head to manifold gasket.

Email sent :ninja:

Will get onto MD Spares on Monday

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3649774
Share on other sites

  • 1 month later...
Autobarn....that's where I got my ones

Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759142
Share on other sites

GCG have the gaskets... call them..not cheap though.. i think around the $50 mark for a dump gasket... you can use ur old one with some glue... or ifyour flanges are real smoothe and rust free just use exhuast seals and no gasket...

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3759523
Share on other sites

Hey Dan

my local Autobarn couldn't help me as "i" didn't have the part numbers, as you would see Trent replied last month about having them but i haven't heard back since transferring the money so the search continues so i can finish the car.

I will call a couple of the AB stores in Melbourne/Sydney tomorrow and see if they are able to help out further.

Cheers Ben

WTF????? i have not recieved your money and we even called and SMS'd to see if you still wanted them, with no reply................... they are still here waiting in the same spot.

I take offense to the above greatly. If you have proof of transfer (im assuming wrong acc) let me know or at least call me 0419 590220 if there was a problem

post-34927-1207007399_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760565
Share on other sites

WHAT????? i have not recieved your money and you did not reply to CATS calls or SMS................... they are still here waiting.

Transfered 29/2/08 01:27:19 pm, receipt number: N022986488721

I replied to the sms and also sent you a couple of emails but didn't hear anything :( .

Just checked again and the account details are correct (from sms) so you should of received it, no biggy though i just need the gaskets to finish the car hence trying to source them elsewhere.

Not having ago at you or Cat just want to finish the car Trent and figured you guys have been busy :(

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3760590
Share on other sites

I think you should send the Pringles as well, a show of good faith

No need for good faith, just some crossed wires so it looks :rant:

BUT i do have the munchies a little after finishing work and some pringles would go down a treat :)

Link to comment
https://www.sau.com.au/forums/topic/206143-turbo-gaskets/#findComment-3764237
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...