Jump to content
SAU Community

Recommended Posts

Hey there people.

I just recently bought a 1994 R33 Skyline.

It has a Big HKS exhaust and a Greddy Intercooler and a HKS pod.

I had a bleed valve fitted and it is running at 11psi, punching out

187RWKW.

I was just wondering what is next to do to it. I just wanna do it and

not have to worry about replacing stuff over and over.

I was hoping for about 350-400+ ATW. The car is off the road for some

of the work to begin.

I am not made of money and I saved for years for this so I am

hoping to do the work myself.

Can you please help me out.

Thanks,

Shaun :ninja:

post-47374-1203073305_thumb.jpg

post-47374-1203073351_thumb.jpg

post-47374-1203073509_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/206245-what-to-do-next/
Share on other sites

doubling your power atw is going to be a very costly excercise... You'll need to fully rebuild your motor with forged internals, and have an extensive parts list to achive those figures. ecu, injectors, afm, fuel pump, head gasket, plugs, coilpacks, manifold, plenum, fpr, monster turbo, new dump, ext wastegate, boost controller, cams, pistons, rods, just to name a few, the list goes on and on and i'm sure ive missed a lot of things too. Do more searching around the forced induction threads and you should find the answres you need.

Link to comment
https://www.sau.com.au/forums/topic/206245-what-to-do-next/#findComment-3649810
Share on other sites

R33silverS2 is right. Can't just pull Horse Power out of the air. Something has goto give. = Change more parts = more time = more money.

BTW ya air pod looks alittle dirty in that pic. Give it a clean and let the car breath better. Is your Greddy Intercooler a front mount? Just hard to see from that pic angle.

Link to comment
https://www.sau.com.au/forums/topic/206245-what-to-do-next/#findComment-3649819
Share on other sites

shaun_perry - what is the budget??? Thats the key point here you haven't mentioned.

And like a few people before you, i dont think you realise how much its going to cost yet :huh:

If its 20k - you might be lucky and get 350rwkw, but i would imagine it'll be closer to 25k.

Its not something you can realistically do yourself as its going to require a full motor build by a professional as when your spending big $$, you want it done right.

Link to comment
https://www.sau.com.au/forums/topic/206245-what-to-do-next/#findComment-3650009
Share on other sites

R33silverS2.

That pod filter has been replaced with a new filter element.

(00)skyline(00).

I am not sure of a budget but approx the 10-15K mark.

My father and I will be able to do the hard work like fitting parts and

possibly rebuilding the engine ourselves as he is a Mechanic.

There are not many "experts" in skylines and other jap imports here so

we will do the hard yards and we'll have it tuned elsewhere.

I was just wondering what the next mod is. the car will be off the

road till all the work is done.

Thanks guys.

Keep the tips coming. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/206245-what-to-do-next/#findComment-3651997
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...