Jump to content
SAU Community

Recommended Posts

I have a Nismo Pump, Nismo Fuel Reg,Highflow and a Z32 on the way.

Wanting 250rwkw...Should I do the injectors or max out the stock ones as I have been told it will work no problem?

My Gut tells me to get em but my wallet and wife says "Use the ones you've got"

Help!!!!! Is it too much of a risk???

Dave

Link to comment
https://www.sau.com.au/forums/topic/206634-r33gts-t-upgrades/
Share on other sites

def go injectors.

I upgraded to nismo 555cc injectors with my hi-flow set up. the standards were 90% duty cycle when giving it at the track.

got the 555cc's and max I have seen would be 60% with 235rwkw

Hmm thats what i thought but my tuner doesn't want me using them. Just nismo's 555 have certain issues, 740s are fine apparently. He said anything other then nismo 555's. Sards are too much stuffing around and not sure if tomei 555s are the same as nismo. I did have a reason, but forget at the moment. Will ask him again what the prob with them is....

Hmm thats what i thought but my tuner doesn't want me using them. Just nismo's 555 have certain issues, 740s are fine apparently. He said anything other then nismo 555's. Sards are too much stuffing around and not sure if tomei 555s are the same as nismo. I did have a reason, but forget at the moment. Will ask him again what the prob with them is....

555s have issues???? :teehee: Only the biggest and best tuning companies in the world use them not only on customers cars but their own cars.

Ive had them in my car for a year now,no complaints.

Yes i know this, that's why i'm asking the questions. Wish i could remember what he said to me lol, he explained a little problem they tended to have. Might be awkward rocking up with nismo 555s after he said not to haha. Dunno what to do?? Should i just buy em and say yeah i'm gonna run with 555s? Or go nismo 740s (i will have close to 300rwkw in the end)? :teehee:

Yer i know that but like i said, my tuner doesn't want me to run the 555s. Said i can run the 740s as they are different. Price is of no concern. Will have to call him up tommorrow and get the low down on the situation.....PM me if ya like to talk further :teehee:

  • 3 weeks later...

Getting excited now, have just sent turbo to be hiflowed... been told its getting a TO4 compressor and 56mm exhaust wheel, dunno what that means really but it sounded good....Bigger than whats in there I bet so thats a bonus.

Next are injectors then off to the dyno I go.

Dave

Edited by Turbo Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...