Jump to content
SAU Community

Recommended Posts

OK I've almost finished my oral presentation on the new p-plater laws. My final question to all you guys and girls is that;

if events: drag, drift, track days/nights were subsidized by the Government and were made cheaper I mean alot cheaper ($10 entry at calder and $50-100 trackdays for example) would you refrain from 'hoon' like behaviour on the roads?

I understand how much more busy places like calder will be but try to keep this out of your decision.

Cheers ROb

Link to comment
https://www.sau.com.au/forums/topic/207459-ethicalsocial-question/
Share on other sites

i think you would get more people to the events, definitely

but i dont think that will clear it up on the streets

what happens on the streets varies from the way people just drive on a day to day basis to someone pulling up next to you at the lights and wanting to be a knob - it'll happen anyway

i learnt a lot from the driver training days - especially in the wet

and after a full day of speeding around sandown, i had enough of the fast life and twas good to just cruise around :)

doing training/track days once a month i reckon really does help ease the need for speed - so yes, if it was subsidised i reckon it will help calm the hoonage

you'll clear it up to an extent.

But as always, there will still be illegal meets and what not, it will just be at a much reduced level.

This is based on facilities not only being cheap, but also semi-close by and open regularly (more than once a week)

It will help to a certain extent but it will get the wrong crowd I think. Similar to when they have a gun amnesty, its always the people who have no intention of using the gun that hand it in.

With cheaper events, you will attract a very high population of people who would have no intention of doing races on the streets and actually get more people interested in this type of event who otherwise wouldnt be bothered (e.g Joe Bloggs in his barina).

Having cheaper and more accessible events is the long term whinge of speeders/street racers but in reality it would deter very few as the buzz/danger/excitement/impulse isnt there.

Yeh i think it would help too, definately would not stop hoon totally behaviour but personally i feel it would curb it somewhat. Mnay people with high powered cars and imports have never seen the strip or a track and therefore the only times they have been able to 'use' their car and get what they payed for in terms of performance is illegally on the street.

I think making it cheaper will be great for those who are genuinely into motorsports or drag racing as a legitimate hobby, BUT i don't think it will stop hoon activity on the street as there will always be people who love drag racing on the street and have no interest in doing it 'officially' at the strip or the circuit.

I think making it cheaper will be great for those who are genuinely into motorsports or drag racing as a legitimate hobby, BUT i don't think it will stop hoon activity on the street as there will always be people who love drag racing on the street and have no interest in doing it 'officially' at the strip or the circuit.

word. some people don't care about tracks and strips..

Agreed it cannot stop hoon activity entirely but import drivers and the like would have less of a reason to feel the need to put the foot down and drag if they knew it could be done it a perfectly legal way easily and cheaply and therefore the risks associated with doin it illegally are made even more not worth it. I know thats what i would do / think.

ok thanks people,

1. so what do you suggest that is realistic in the aim of stopping as much as possible 'hoon' behaviour?

2. Do u think that the only way of stoping stuff like it will be to have the cars removed from the driver?

3. How effective do you think the new tac ad on TV is? will this help?

I know that these questions dont really nead answering but I cant walk into a presentation with no research, if u know what I mean.

Thanks for all of the responses so far :D

1) I think its more about driver education. Alot of mistakes happen that cause accidents, it isnt always in relation to hoon behaviour. Plus, if some of the young drivers are in a car in a controlled environment that "looses control" maybe itll scare them enough that they dont try anything stupid on the roads.

2) I dont think car removal is the only answer. You can be a hoon in a Skyline, a 200SX or your parents Comoddore. You could even been a hoon in a toyota camery. Dragging off the lights, spinning up the wheels, or driving dangerously is the driver and not the car. Taking the car away may be preventative, but they can always jump in a family members car. It will help, but I think there must be a better way.

3) New TAC add I dont think is that effective. I just looked at it and it didnt make me think for a second I should change my driving (not to say I would classify as a hoon, but I would be lying if I said that I haven't gone over the speed limit before).

OK I've almost finished my oral presentation on the new p-plater laws. My final question to all you guys and girls is that;

if events: drag, drift, track days/nights were subsidized by the Government and were made cheaper I mean alot cheaper ($10 entry at calder and $50-100 trackdays for example) would you refrain from 'hoon' like behaviour on the roads?

I understand how much more busy places like calder will be but try to keep this out of your decision.

Cheers ROb

No, it wont solve the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...