Jump to content
SAU Community

Radiator Air Deflectors, New Group Buy (no 5)


Recommended Posts

Hey ppls.

As many of you may know, I manufacture a vast range of Aluminium Radiator Air Deflectors.

Currently I have designs for the following cars.

R33 GTS-T Series I

R33 GTS-T Series II

R33 GTR Series III

R34 GTT Series I Standard Front Bar

R34 GTT Series I Nismo Aero Front Bar (Also fits R34 GTT Series II)

Stagea Series I (with and without scoop)

Stagea Series II (with and without scoop)

I also have a design that seems to fit R33 GTR Series I or II but not yet confirm. This model was custom made for a guy with an R33 GTS-T fitted with an R33 GTR front end. Was a tight fit, but it fit.

The guides are made from 1.2mm Aluminium and will be powder-coated in a satin black finish. I have decided not to anodise them as the finish on the aluminium must be perfect for it to look as good as it should, and manufacturing processes can’t always guarantee this. You can delete the powdercoat from the guide, this will save you $5.

The price varies according to the model, and all prices must add freight. The guides are sent bubble wrapped in tough cardboard boxes. I use Aust Post standard post. I cannot be held responsible for any damage during transport, but I’ve not had a problem with this method so far.

Freight is a minimum of $25 but if your postcode is a long way out of a capital city, then the amount will be on a case by case basis. For instance, one of the packages I send in the last group buy cost me $35 in postage…. But I didn’t pass that cost on because I didn’t mention this clause.

Note’s from previous group buy.

I learnt a lot from the last group buy. One of these things is that I will never offer a product that I have not finalised the design for. The other is never attempt a group buy whilst in the process of changing jobs. Anywho, all those problems are in the past now. I appreciate the patience of the people from the last group buy who waited whilst I faffed around.

Pricing:

R33 GTS-T Series I

R33 GTS-T Series II

R33 GTR Series III

All $80

R34 GTT Series I Standard Front Bar

R34 GTT Series I Nismo Aero Front Bar (Also fits R34 GTT Series II)

All $80

Stagea Series I $120 with scoop

Stagea Series I $90 without scoop

Stagea Series II $120 with scoop

Stagea Series II $90 without scoop

So, who’s in?

R33 GTS-T Series I

_Scotty_ (Bare)

rd-runr (Bare)

W0rp3D

H@ME

R33 GTS-T Series II

SkyKC

bnew

R334door(s2) (Bare)

Silver_R34_GT-T (Bare)

Rhinorebel (Bare)

cjpwrx

t.head_wood

STRYKR 33

sfrizza

reflexman

R33 GTR Series III

R34 GTT Series I Standard Front Bar

Silver_R34_GT-T (Bare)

mr_tea_pot

R34 GTT Series I Nismo Aero Front Bar (Also fits R34 GTT Series II)

Magic

lastarfighta

R34 GTT Aftermarket Front Bar (Also fits R34 GTT Series II)

lcy

Stagea Series I (with and without scoop)

Stagea Series II (with and without scoop)

Cheers and BASS OUT

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Is there a minimum number for this group buy?

Do you have any pics of the guides fitted to an R33 GTR series 3?

I will most likely be in :)

Ok im in if any of these gona fit R33 GTS4 (non turbo) 1994 ? black one, deliverd to 2155.............Please let me know asap\

WILL YOUR R33 GTS-T SERIES ONE WILL FIT MY CAR?

Cheers

By the way I dont have any turbo or FMIC , how will I be benefit by installing one of these in to my car? any explanations why as for what benifits will a non turbo car gonna get from these? :ermm:

I'm in for my R33 GTST S2. PM me with details when it happens.

me too please but i would like mine in black thanks.

Cheers

Allan.M

By the way I dont have any turbo or FMIC , how will I be benefit by installing one of these in to my car? any explanations why as for what benifits will a non turbo car gonna get from these? :ninja:

The idea seems simple enough to me, more air into the airbox means more airflow into the car.

More cold air is good for a car, but more important for turbo'ed cars than N/A from my small knowledge on cars :happy:

Air deflectors don't exactly help FMIC's anyway.

me too please but i would like mine in black thanks.

Cheers

Allan.M

so whats the go bud

how much for postage to Adelaide 5013

but the colour i want is Black please.

Cheers

Allan.M

im really really interested in buying a aluminium one for a r34 GTT, like as when can i send u money lol

please pm me asap to arrange etc :no:

thanks

The idea seems simple enough to me, more air into the airbox means more airflow into the car.

More cold air is good for a car, but more important for turbo'ed cars than N/A from my small knowledge on cars :P

Air deflectors don't exactly help FMIC's anyway.

Ic thanks for that,

So can some one please tell if any of these gona fit R33 GTS4 (non turbo) 1994 ? probably R33 gts-t series1 one will fit?

IF so i love to buy one pls

black one, deliverd to 2155.............Please let me know asap\

Is there a minimum number for this group buy?

Do you have any pics of the guides fitted to an R33 GTR series 3?

I will most likely be in :down:

I would also like to see a picbefore buying.

Also I noticed there are references to Series 2 n 3 guides are different? does anyone know in what way?

Ic thanks for that,

So can some one please tell if any of these gona fit R33 GTS4 (non turbo) 1994 ? probably R33 gts-t series1 one will fit?

IF so i love to buy one pls

black one, deliverd to 2155.............Please let me know asap\

is this group buy still ongoing....? no answers....

Hi Guys

Sorry for the long delay

Been a busy busy boy.

All your names have been updated.

This GB wont go ahead until I have about 20 people, otherwise it's not financially viable.

Cheers

Pete

OH should i have said i wanted one in silver NOT powder coated black ?

AND CAN I ALSO ADD I WANT A R33 SERIES 2 ONE IN SILVER NOT POWDER COATED ASWELL

:P thanks

Edited by Silver_R34_GT-T
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...