Jump to content
SAU Community

What Camshafts For Gtst?

jeffworld2

By jeffworld2,
in Engines & Forced Induction

 Share

Recommended Posts

r33cruiser Grand Master

r33cruiser

Posted
Posted

U ARE SCREWED DUDE.

256 is pushing it. any more and u WILL WITHOUT A DOUBT, need springs and solid conversion.

also, common 264 or 260 d cams have 10.25mm lift.

i sure hope that u have some decent injectors and a ecu to smooth out the rough edges.

but its all worth it for that idle :down::rofl::D

^^of course those are procams....not poncams.

NYTSKY Grand Master

NYTSKY

Posted
Posted
U ARE SCREWED DUDE.

256 is pushing it. any more and u WILL WITHOUT A DOUBT, need springs and solid conversion.

also, common 264 or 260 d cams have 10.25mm lift.

i sure hope that u have some decent injectors and a ecu to smooth out the rough edges.

but its all worth it for that idle :down::rofl::D

^^of course those are procams....not poncams.

I have the Tomei Poncams in my car.256 are direct drop in as stated by Tomei.

Sinful Grand Master

Sinful

Posted
Posted

Jeff you want to get a set of drop ins.

really any cam upgrade thats going to be reved hard needs springs and retainers but for what you want a set of drop ins will be fine.

There is plenty of options all of which will suit your application. Just see what you can get for the money and go with it.

Sinful Grand Master

Sinful

Posted
Posted

If you want it lumpy like my car its going to cost alot more than the normal drop in option.

The cams alone become more expensive

Budget for springs and retainers. Solid lifter conversion, labour to check piston to valve clearance and set-up the rest of the head to suit.

My head cost as much to build up as the bottom end did.

Joeys car has the drop in tomei's.

Sinful Grand Master

Sinful

Posted
Posted

They are not your only option.

HKS, JUN, TODA, Tomei all offer drop in cams for the RB25. Tomei's are the most widely used though.

If you want it to be the best it can then your going to need the larger cams with the springs etc but if being budget concious then drop ins will need to sufice.

BHDave Grand Master

BHDave

Posted
Posted

If you want big drop in's then look for some second hand apexi's on japan yahoo. They made up to 280 duration but are no longer available new.

If you want easy new biggest currently available drop ins then go for hks. 256 8.8mm inlet, 264 9.0mm exhaust. I run these myself with stock lifters and springs and retain vct. As long as you keep the boost under 20psi you won't have an issue.

If you don't mind losing the vct then go hks 264/264 with adjustable gears.

You won't get any higher lift without head work and solid conversion.

Now a question, when is it surging? You have a pair of N1's bolted to the side of your 25 right?

jeffworld2 Veteran

jeffworld2

Posted
  • Author
Posted

actually adve they are gt-ss now, so it surges all the time. :(

i will shove some poncams in and hope it helps. now i have the seat and all it needs to be tracked lol. thanks guys i am decided now, we shall see what happens soon enough

Risking Grand Master

Risking

Posted
Posted

jeff the surging will pretty much be elliminated once its tunned properly this week!

You honestly have no idea what the engine is like till its been tunned and finished. GTss' are not a turbo that causes surging like you have, the tune thats running your engine is basicly the same one that was running it prior to the engine rebuild and the turbo conversion.

Dont buy cams till its done and then decided if your not happy with the surging issue.

Honestly if your going to turn it into a track car the money your going to spend on cams etc would be much better spent towards better suspension/half cage/ brakes etc etc.

The cruising surge you have is not going to effect the car on the track and it wont be nearly as bad as what it is now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...