Jump to content
SAU Community

Recommended Posts

i thought i had the right of was as well, however that little part where he is is inbetween the 2 sides of east boundary road. 1 person told me he has the right of way because he is in the intersection. :confused:

however if it was just 2 normal streets i would ave the right of way???? im confused , nearly had a few problems earlier on this afternoon :D

Whether you have right or way or not, if I was in that situation (which I am every now and then), I'll make my way forward slowly and make sure I'm ready to pounce on the brakes if the other guy comes out...

It's a very iffy situation right there, and not uncommon either.

yeah thats what i was like, everytime there are 2 cars there usually each driver is like wtf??:confused: i'll give way to you, no i'll give way to you..... there really should be instructions of some sort on that corner :D

i might email my pic to vic roads and let them know about the problems people have on this intersection.

Isn't there a giveway sign at the carpark exit. My dilemmma is when you are both at a cross street from opposit directions and you both have a give way sign and one of you wants to turn across the other. My solution is to play safe and sign for the other guy to go first.

If two or more drivers at an intersection are facing give way or stop signs then the signs effectively cancel each other out. The drivers should proceed as if there were no signs controlling the intersection, following the basic give way rules.

The above is a quote from Qld Transport Web page

As a rule, if a vehicle is leaving private property he must give way to all street traffic. Unless traffic signage is present.

In this case im not familia with the area, but it looks like orange vehicle is leaving a shopping centre (car part) and even if the scenario were opposite. and he was proceeding straight and u were turning u would still b in the right

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...