Jump to content
SAU Community

Recommended Posts

Hey guys,

I have an r32, rb20 at the moment, basic mods; r33 turbo, front mount, exhaust, safc II, etc, putting out about 170kw atw, looking for around 250 atw, have been advised the best way to go about getting more power at the wheels is to do an rb25 conversion. Just wondering exactly what i need to get this in my 32. I have been told that r32 mounts and gearbox line up fine, just wondering about wiring, and clutch. As it is at the moment, my clutch is slipping a little, so im going to keep that untill i do the conversion, will i need to buy an rb25 clutch or an rb20 clutch or are the the same? Also does anyone know of any garages in Brisbane that will be able to complete the conversion and do a decent job of it.

Any Help will be greatly appreciated.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/
Share on other sites

Rb20 and 25 clutches are the same. You will need a good auto elec. Everyting ellse bolts up nicely. You will also need a diffrent throtle cable from memory. and r33 ecu and loom cos the rb20 ecu wont run the vct or the injectors.

To be honest it would be much eiser to slap a 2530 on a rb20 and make a solid 220kw.

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3697785
Share on other sites

Rb20 and 25 clutches are the same. You will need a good auto elec. Everyting ellse bolts up nicely. You will also need a diffrent throtle cable from memory. and r33 ecu and loom cos the rb20 ecu wont run the vct or the injectors.

To be honest it would be much eiser to slap a 2530 on a rb20 and make a solid 220kw.

Yeah thats my other option, but i've just had a lot of people say that you can waste a lot of money trying to get good power out of an rb20...

Definetly looking at going with an rb25 box, do you need to mod the tail shaft to fit it in?

Edited by chrishelliwell33
Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3698550
Share on other sites

Yeah thats my other option, but i've just had a lot of people say that you can waste a lot of money trying to get good power out of an rb20...

Definetly looking at going with an rb25 box, do you need to mod the tail shaft to fit it in?

yes tail shaft will need to be modified. Most likely have a custom one made up. While your there i would

seriously look at changing the diff also.

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3699225
Share on other sites

Been there, done that.

Get a half cut so you get the ECU and loom.

The RB25DET produces TORQUE - torque to burn! The R32 'box is holding up quite well in mine (but it is a GTS4, not a GTSt), with up to 180kW coming out all 4 wheels.

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3699500
Share on other sites

Been there, done that.

Get a half cut so you get the ECU and loom.

The RB25DET produces TORQUE - torque to burn! The R32 'box is holding up quite well in mine (but it is a GTS4, not a GTSt), with up to 180kW coming out all 4 wheels.

I've talked to a a mechanic who has done the conversion before, and he reckons its easier to use the rb20 loom and just wire in the few extra things, vct ect. is that true?

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3699807
Share on other sites

honestly, stick with abz idea of "2530 on a rb20 and make a solid 220kw."

my conversion was done in japan but if it came with a rb20 i wouldnt bother putting in a 25 because it will cost way to much...

2.5k for engine + 2k for box 500-1000 labour (including re loom) + custom tail shaft + other bits n peices +engineers cert $1200 = big money

if u really want the 25 sell urs and buy one that has already been done.

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3699848
Share on other sites

Mmmm I wouldnt suggest using a rb20ecu. Im running a rb25 ecu. Best to let the ecu deal with the injectors and the vct rater than putting in an extra system.

RB25 box is a great idea. All you need is the yoke (the part that comes out of the back of the box) and get a tail shaft place to weld in on to the original 32 tail shaft.

No need to upgrade the diff. The R200 is fine. A nice nismo or kazz LSD is always good and getting a diff place to assemble and align the gears will ensure you never have to worry about it.

Another good turbo option is a td06. That will get you a decent 260kw dayt in day out.

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3701092
Share on other sites

It all boils down to how much you want to spend and how much power you want...a rb20 making 200-220rwkw is not a bad thing...a rb25 box is definitely a good idea though...

Yeah from the response i've been getting, as im only looking for 220-250 kw, be better to keep rb20 and work that. no point spending all that cash to throw a 25 in and only look to get 250 out of it...

thanks for the responses guys

Link to comment
https://www.sau.com.au/forums/topic/209088-rb25-in-r32/#findComment-3701392
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...