Jump to content
SAU Community

Recommended Posts

ball park is around 260kw ish at the rears

the kit would be just short of $3k delivered including all the junk etc

you have two rear housing options being 0.68 and 0.87 for the rb25

from memory and previous posts from guys who have used it - most have said go the 0.87 rear

you can check the rb25 turbo upgrade thread and look for some users who have fitted the 2835 to their rb25 and their dyno results

Dezz, i thought 2835's were 400ps just like the GTRS, its the 2835R's that are 420ps?!?

Havent sniffed around those parts in awhile, but I got the impression the GTSS and GTRS were successors to the 2530's and 2835s?!?

Can sum1 clarify?

Go a 3037 :)

GT-SS is not a 2530 replacement.

GT-SS is similar to R34 N1's, a 2530 is bigger than a GT-SS.

GT-RS/2835, not much between the two really.

GT-RS is not a 2530 replacement either, GT-RS is bigger than a 2530

thats what I meant:

GT-SS = 2530 --350ps

GT-RS = 2835 --400ps

Or there bouts :)

U on Niteshift too Mr Ash?

I was oncall :)

The "=" above, aren't.

GT-SS is smaller than 2530 -

ah, just realised my post was a big backwards (fixed it)

  • 4 weeks later...
thats what I meant:

GT-SS = 2530 --350ps

GT-RS = 2835 --400ps

Or there bouts :rant:

U on Niteshift too Mr Ash?

HKS GT2835 - 380/400/410 PS Output (This turbo is N/A to skylines as the mounting is flange is different.GT25 inlet, skyline is T3

HKS GT2835 Pro S - 420 PS Output T3

HKS GT2835R - 420 PS Output GT28 flange

HKS GT-RS - 400 PS Output

Thus, the only turbo (in the 2835 range) you will be able to fit onto the skyline is a Pro S which is rated at 420, 20 more PS than the GT-RS.

Edited by Turbz RB-25
  • 3 weeks later...
  • 2 months later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...