Jump to content
SAU Community

Stagea Intercooler

MRO

By MRO,
in Four Door Family & Wagoneers

 Share

Recommended Posts

MRO Community Regular

MRO

Posted
Posted

I am thinking about getting one of the new stealth cooling pro intercooler from Just Jap - see link below

http://www.skylinesaustralia.com/forums/Co...94#entry3707494

They use the factory cooler pipes on a r33. Does anyone know/think they would match up to the Stagea factory pipes? If so it looks like an easy install!

Link to comment
https://www.sau.com.au/forums/topic/209747-stagea-intercooler/
Share on other sites
chook Mentor

chook

Posted
Posted

i installed an R33 ARC FMIC, slightly shorter than these, bolted up to factory pipes, might just have to modify the mounting points slightly and do a bit of hacking on the front inner metal bar. But with enough skill and patience anything can be made to fit.

Xmetal Mentor

Xmetal

Posted
Posted

I don't see why it wouldn't fit because the pipes suggest that it would fit up really easily.

I'd much rather try and get this kit to work rather than their other kit which involves drilling a hole in the chassis.

MRO Community Regular

MRO

Posted
  • Author
Posted
Exactly what ive been looking for, thanks for putting it up. Ive ordered one, will let you know if theres any problems but i doubt it, its all in the same place.

cheers.

Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

chuckie Mentor

chuckie

Posted
Posted
Good work Momo. I think it will bolt straight up but now you will be able to tell us all.

Morgan you will have to do some mod`s to reo bar i hav just had dumie fit of blitz & had to mod reo so good luck dude.cheer`post-36964-1205209662_thumb.jpgs chuckie.post-36964-1205209578_thumb.jpgpost-36964-1205209732_thumb.jpgpost-36964-1205209804_thumb.jpgcooler size is 360x820x70.

Tangles Grand Master

Tangles

Posted
Posted

they look good

look to be exact same size to my Apexi cooler, exact same shape etc except mine is HALF tube'n'fin and HALF bar'n'plate

Id be getting one of these intercoolers, if you want to use the same factory holes

you'll need a couple of stainless pipes tho to go from inside engine bay to the intercooler, I used a pipe kit off ebay

edit: I didnt hack anaything, bar the plastic Dayz front bar numberplate bracket (to open it up to let max air flow thru). if you install the 'cooler on a slight angle it fits without touching the reo bar

MRO Community Regular

MRO

Posted
  • Author
Posted (edited)

Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

Edited by MRO
Tangles Grand Master

Tangles

Posted
Posted
Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

oh I thought they didnt come with pipes.

nice buy if they do, thats for sure.

um, photos, none here at work

there are intercooler threads on here where Ive posted pics

just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Id like to get a small sticker number plate eventually.

DCAM0010-1.jpg

DCAM0014.jpg

DCAM0010.jpg

mike40sydney Experienced

mike40sydney

Posted
Posted
Tangles - i thought the pipes supplied would match up to the pipes used for the factory intercooler?

Do you have pics of the Dayz bar trim up - i want to do this too as the number plate bracket seems to fill half of the opening.I was concerned it might weaken the front bumper too much and i was uncertain how i would mount the plate afterwards.

i mounted my plate on the bar itself just above the original holes

post-26949-1205220932_thumb.jpg

RubyRS4 Grand Master

RubyRS4

Posted
Posted
just cut the dayz number plate section off (poorly cut, mind you) and bolted the number plate to the side air dam where the side mount used to be.

definately does not weaken the front area

Tangles, where in Adelaide are you?

I'd like to have a look at your intercooler install if you don't mind.

I've got a front mount kit coming for my RS4.

:blink:

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • joshuaho96
      Automatic Power Button Light Flashing

      By joshuaho96 · Posted

      Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...