Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Recommended Posts

^ couldnt agree more mate!!

I love my car even more with this remap!!

Wish i did this 1.5 years ago when i was told about it lol

Just got my R32 tuned by Toshi a few days ago, very happy with the results! Much improved mid range and top end. Would easily recommend him to anyone :P

Please come to me.

I will check what type of ECU.

hey toshi

whats the story with 97 S1 RS Four Stagea

can you tune em?

  • 4 weeks later...
I wish you would come up to Brisbane.

Seems well worth it for the money.

How many people are interested in remapping?

Could have an ask around in the QLD section. GTST was one of them, could be a few more as the price seems very good.

how much for a second remap? eg get a first remap, then bigger turbo/injectors/afm upgrade, and need a second remap but already have the daughterboard installed?

Hi PWND

I sent PM.

bahanthich

I have not installed daughterboard to ECU.

Daughterboard cost is $700.

So I use H8 plcc.

This costs is $80 (can not erase)

I will make data on daughterboard ECU(real time tune) then burn data onto H8 chip.

If I install daughterboard to ECU and tune , road tune would cost $1050.

If I install H8 chip, First and second remap is same price.

If you install daughterboard $80 discount for the second remap.

Thank you

how much for a second remap? eg get a first remap, then bigger turbo/injectors/afm upgrade, and need a second remap but already have the daughterboard installed?
Hi PWND

I sent PM.

bahanthich

I have not installed daughterboard to ECU.

Daughterboard cost is $700.

So I use H8 plcc.

This only costs $80 (can not erase)

I will make data on daughterboard ECU(real time tune) then burn data onto H8 chip.

If I install daughterboard to ECU and tune , road tune would cost $1000.

If I install H8 chip, First and second remap is same price.

If you install daughterboard $80 discount for the second remap.

Thank you

hi toshi

can you do R34 GTT ecu remapping? I currently have only a turbo back exhaust .. but I want to get a boost controller and put the boost up to 11 and then have the ecu remapped so as to get a good/safe afr etc

What's the cost? Would a SAFC2 be a better option than a remap?

Hi Delta Force

Are you Sydney?

hi toshi

can you do R34 GTT ecu remapping? I currently have only a turbo back exhaust .. but I want to get a boost controller and put the boost up to 11 and then have the ecu remapped so as to get a good/safe afr etc

What's the cost? Would a SAFC2 be a better option than a remap?

Yeah I'm in sydney mate.. By the way, can you up the boost with a remap too and then tune the AFR? I'd prefer not to have to buy a SAFC2/Boost controller if I don't have to.

Edited by Delta Force

I sent PM.

Thank you

Yeah I'm in sydney mate.. By the way, can you up the boost with a remap too and then tune the AFR? I'd prefer not to have to buy a SAFC2/Boost controller if I don't have to.
  • 2 weeks later...
I wish you would come up to Brisbane.

Seems well worth it for the money.

Toshi, I live on the Gold Coast but would travel to Brisbane if you are heading this way :ermm:

hey toshi,

im interested in a tune on a r32 gtr, only has cat back, air pods, and a bleed valve, seems to run 8psi as stanadard, guess will raise to 12-14psi, what sort of torque and power levels would that give. if battery is removed from car is tune erased or damaged, where in sydney are u?

thanks mate

had my RB20 cefiro remapped by toshi, very happy with how much better the car drives. comes on boost much faster, was tuned with a safe tune because the car is primarily a track car.

for the price its defnitely worth it!!

see you soon toshi, with Z32 and Injectors!!

Hi benr32gtr

I sent PM.

Hi esky mad

I think also you need change air valve.

see you soon.

had my RB20 cefiro remapped by toshi, very happy with how much better the car drives. comes on boost much faster, was tuned with a safe tune because the car is primarily a track car.

for the price its defnitely worth it!!

see you soon toshi, with Z32 and Injectors!!




  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...