Jump to content
SAU Community

Recommended Posts

hello everyone, i own a series 1 R34 GTS-T... options include powerfc with hand controller, hks injectors, bigger turbo, front mount, and a few other goodies but lately, my beast has developed a nasty habit, at idle the engine seems to hunt from around 1000rpm to 16-1700rpm at constant intervals, the hand controler tells me that the inj duty is cutting out and thats y it decreases but i dont know y it increases to begin with, i first assumes a dirty idle control solenoid, so i removed it and cleaned, and plugged in to test the opperation, i could se that the solenoid was working fine and had no blockages, the next step is to inspect the steeper motor but i do not know what it should be doing... i have searched all the vacum lines and am 98% certain that there is no vacum leak, the throttle body appears to be clean and good

i ask if anyone has every had any simliar problems with hunting in the R34 neo and how did you fix it? i would love to get my hands on a wiring schematic so i know which wires i can back probe and check for faults...

PLEASE HELP ME... or point me to someone who can :pirate:

i appreciate any help you can give

Link to comment
https://www.sau.com.au/forums/topic/210105-problem-with-my-34/
Share on other sites

Ignition coils misfiring maybe??? or burnt out sparkplugs??? :pirate:

I had a similar problem.. but then again I've got a GT .. there's a lot more going on in your engine bay than mine..

Hope you figure it out :D

ok for starters, it may not be a GTS-T it was debadged when i bought it, but it most definalty the 2.5 NEO turbo, i dont know the diference between the GT or GTS-T...?

ok now back my problem..

yeah im fairly certain that there are no vacum leaks, iv inspected the various pressure sensors, pollution gear, iv had the air flow meter out to make sure its not damaged, i havent had the spark plugs out yet but i guess that i should look there next, but im am curious about the steeper motors, has anyone had any problems with these before, and once again, does anyone have any wiring diagrams for the engine management? or where i can get them from (buy them from)?

heres a pic i just took in the worskshop! still along way to go to glory but its good for 250rwkw at the moment, plans for bigger high mount turbo, custom plennum etc etc.. :teehee: if i can ge this stupid problem fixed, any longer and im just going to have to tkae it a pro in brisbane or something, anyone recomend someone who knows 34's in brisbane?

post-48817-1205379079_thumb.jpg

oh, ok, thanks for the update, but i guess no one can help me out with the info i require? i realy wanted to fix it myself, its a tough drive to brisy with a car thats not running right, i dont want to cause more damage

  • 3 weeks later...

sounds like someone just bought their first skyline XD well if your that worried about doing serious damage just get it put on a frieght train down to brissy.. shouldnt cost too much... or if it's only doin it while idling.. just strap yourself in and go non stop straight to brissy...

after all this i cant help you with the problem

Sounds ignition related. Get the coilpacks and plugs out. Change the plugs anyway.

The AAC valve might be related to it. Maybe your oxygen sensor is kaput.

I was going to say 02 sensor as well, they do funny things on the R34 when they play up/die, but normally they make the engine hunt low-down then stall on hard braking.

Hunting high then low has always pointed to a dodgy throttle position sensor in my book, sometimes something as simple as taikng the connector off then putting it back on can fix a poor contact with the plug :ermm:

thanks heaps 666DAN, this is the sort of thing i have been looking for, but... will it still apply since i have a range of aftermarket gear such as the apexi computer, avcr boost controller, different injectors and other differetn goodies, i supose i will have to try... so far, i have tried remvoing different electrical conections while the car is running, removing the sensor of the stepper motor stops the hunting but the revs then sit alot higher, removing the tps sensor also does teh same thing, i have removed the air flow meter and inspected for damage or obstruction to the air flow over the sensor and it all appears to be fine, when i disconnect the air flow meter when the car is running the car simply stops, no waht revs, however in the apexi controller settings, i can change it from standard R34 airflow meter to the other options, it settles the idle down to normal but spits that much fuel out the exhaust that i could catch it with a bucket, i have a feeling its a problem with the air flow meter but i cant be certain without knowing what voltage signal is suposed to be generated at what RPM the same goes for the other sensors, all i could do is try a different airflow meter to see if it changes it, problem is thier are only 3 other R34 skylines in bundaberg and have no idea who owns them or how to get in contact with them.

does anyone know how to get hold of the origianl workshop manuel (including full diagnostic procedure) that has been translated to english... there is no one in town who knows anything about this problem (or wants to know) iv tried other forums and got no response...

the proble is so bad that i have to put the brakes on the make the car run below 2000Rpm, i can drive the car up to fith gear without ever touching the accelerator, it makes it very hard in stop go traffic or thru drive thrus, and other annoying places... to the point where i hav parked the car al together and have resorted to driving my old crappy N/A VL berlina...

I NEED HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

once again, does anyone know anyone in brisbane sunny coast (or queensland) area who is well capable of helping me fix my car?

once again, thankyou in advance for any help you can give...

Get onto marty at mw performance.He is in maroochydore, i know its a bit of a drive though.He has worked on a few of these he is your man , he has all the diagnostic gear.He can plug it into his laptop and have a look for you.Pm me if you want his details.

also apart fromt the hunting at idle does it seem to drive ok on normal driving? Have you checked your wiring to the injectors or your fuel pressure to them? your pump might be shagged.

well i have finaly stopped the car from hunting, i was at about 6500rpm when i heard the heart breaking, soul shattering "BANG!" and the subsequent "clatter, clatter, clatter" as the egine internals turned to mush and i puled to a holt on the side of the road! Iv just destroyed my 1st engine! my R34 is dead!

P.S. anyone got a spare RB25DET sitting around that they arnt using and is in good working order and wants to sell real cheap...? yeah, thought not!

oh well... anyone want sheap R34 skyline parts! got turbo, apexi computer and AVCR bost controller hks 550cc injetors... heaps of stuff give me a call 0412703353 (before i get drunk and pissed off and burn it)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...