Jump to content
SAU Community

Recommended Posts

I am about to replace the turbos on my R33 GTR and i have a choice to make.

I can get R34 N1's through my mechanic for $1495 a piece or i can get GT2860r-7 for $1250 a piece from another retailer.

Which do you think i should go for? I am leaning towards the GT2860's because from what ive read they are the same specs and saving close to $500 is always good.

What are your opinions?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/210168-r34-n1s-or-gt2860r-7s/
Share on other sites

I am about to replace the turbos on my R33 GTR and i have a choice to make.

I can get R34 N1's through my mechanic for $1495 a piece or i can get GT2860r-7 for $1250 a piece from another retailer.

Which do you think i should go for? I am leaning towards the GT2860's because from what ive read they are the same specs and saving close to $500 is always good.

What are your opinions?

Cheers

Hi mate,

I've installed GT2860r-5, a slightly larger turbo than N1 on my R34 GTR. Works very well and got turbos for same price as GT2860r-7. Was considering HKS GTSS but got garretts for much cheaper and works very well with a good tune. Check the prices on -5 as they were the same for -7s when I got them some 4-5 months ago. No compromise on lag and responses very well on pretty much anywhere on rev range...........now supporting 360+ rwkw.

Yes they are brand new for that price, im not risking second hand turbos.

I have looked at the -5's and have considered them but im really not looking for huge power, i dont think i will ever go over 300 at the very most. The main reason for me replacing my current turbos is because my original ones have major oil seal leaks and need replacing, i have been saving the money for new turbos for a while so saving 500 odd is really good for me.

Hi mate,

I've installed GT2860r-5, a slightly larger turbo than N1 on my R34 GTR. Works very well and got turbos for same price as GT2860r-7. Was considering HKS GTSS but got garretts for much cheaper and works very well with a good tune. Check the prices on -5 as they were the same for -7s when I got them some 4-5 months ago. No compromise on lag and responses very well on pretty much anywhere on rev range...........now supporting 360+ rwkw.

-5's are 2530 equivs... there is no way they are the same response as factory/-7's/GTSS/R34N1

There most certainly IS a compromise on lag and response compared to the smaller batch

-5's are 2530 equivs... there is no way they are the same response as factory/-7's/GTSS/R34N1

There most certainly IS a compromise on lag and response compared to the smaller batch

Thats what i was lead to believe.

I am after response over overall power. I am not wanting huge power, i mainly just want my car back on the road :)

I think ill go for the -7's it saves me money and i know they will do the job i want.

There is a black GTR I saw on an igition DVD - which isn't coming to mind right now

but its running N1 turbos on a built motor - 1.7 bar saw it 400kw @ all 4

They upgraded to 2860R turbos (not sure whst specs exactly) now and it makes about 424KW @ all 4

anyways just thought I'd throw that in :whistling:

Hi guys.

I have just done my turbos a couple of months ago on my R32 GTR.

I went for the 2860 -7 with the smaller exhaust housing.

I was told that this was a new smaller housing from Garret to try and reduce lag.

Now, don't shoot me for it because I don't know alot about it.

I know one thing. I was running standard GTR turbos with steel wheels and the difference is huge.

I feel that lag is now non existent which makes it for a real good street car.

I must say that I also installed dump pipes, computer and boost controller so obviously some of the improvements are also due to these extra bits.

Anyway, the car drives really well. The response is quite good.

Power wise, I do realise that power figures varies from place to place but to give you an indication of what was achieved with my current setup, the final power figure on what I believe is a safe tune was 280kw at 1.2 bar.

Anyway, this is my results with I am happy with so I thought that I would share it here.

There is a black GTR I saw on an igition DVD - which isn't coming to mind right now

but its running N1 turbos on a built motor - 1.7 bar saw it 400kw @ all 4

They upgraded to 2860R turbos (not sure whst specs exactly) now and it makes about 424KW @ all 4

anyways just thought I'd throw that in

thats rus's and marks car make 427rwkw on a built gt500 block and tomei internals awsome car i would def go with the 2860s you see nothing but good from them...

Edited by johnbarry88

Turbos ordered :D I went for the -7's mainly for the response etc. I am now a little worried after seeing this thread ( http://www.skylinesaustralia.com/forums/Ga...60-t210071.html ) about my dump pipes. I guess i will find out in a couple of weeks.

Edited by Cooper
thats rus's and marks car make 427rwkw on a built gt500 block and tomei internals awsome car i would def go with the 2860s you see nothing but good from them...

thats the one! fkn machine that thing

inspirational video that you should all watch: http://uk.youtube.com/watch?v=TPPUMoDmWlk

running N1 turbos and making 400kw @ 1.7bar

-5's are 2530 equivs... there is no way they are the same response as factory/-7's/GTSS/R34N1

There most certainly IS a compromise on lag and response compared to the smaller batch

You never asked if he changed cams ,has adjustable pulleys or has an after market computer.

But yes........power output is larger with the 2530's and lag is greater.

If you are not wishing to change anything else on the car except for Turbo's you have made the right choice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...