Jump to content
SAU Community

Recommended Posts

If it's remotely relevant my old rb26 with 0.82 gt35 was making ~400rwkw with egt's (as measured approx 1" from the head) between 870-890degC on all cylinders after applying some pretty big corrections.

By comparison a friends rb with a t04z making a fair bit more power had egt's ranging between 860 and 910deg (a lot less work put into trimming individual cylinders). Both cars on pump 98.

Edited by DCIEVE

I think you'll find Nathan's is still a 2.6L, he will join the cool kids with the 3L's soon enough I hope

I was thinking of doing a freshen up over christmas too. maybe its time.

If it's remotely relevant my old rb26 with 0.82 gt35 was making ~400rwkw with egt's (as measured approx 1" from the head) between 870-890degC on all cylinders after applying some pretty big corrections.

By comparison a friends rb with a t04z making a fair bit more power had egt's ranging between 860 and 910deg (a lot less work put into trimming individual cylinders). Both cars on pump 98.

Thats a good result from pump 98.

Drove it to the exhaust shop today, what a feeling it was.

At full noise the exhaust sounds almost stock! Driving around in traffic its a bit louder.

Could be registered next week :)

Drove it to the exhaust shop today, what a feeling it was.

At full noise the exhaust sounds almost stock! Driving around in traffic its a bit louder.

Could be registered next week :)

any DB measurements or sound samples?

  • 5 months later...

Been a quite hectic last couple of months, thinking I had plenty of time to get ready for Powecruise things went a bit pear shaped after the initial run it.

More later....

Waddya tryin to build up the suspense Dave, spill it already ya beeaartch. :action-smiley-069:

Noel,

I literally need 30 mins to type the never ending saga which is my relationship with this car over the last few months.

Short hand is:

Run in.

Noisy engine bay.

Weird fragments in sump and oil

Engine out

Oil pump rebuilt

Stripped and inspected bottom end

New clutch

New harmonic balancer (modified)

New gears and pulleys (modified)

New thermo fan setup

New complete hot side :)

and a $40 alternator lol

Noel,

I literally need 30 mins to type the never ending saga which is my relationship with this car over the last few months.

Short hand is:

Run in.

Noisy engine bay.

Weird fragments in sump and oil

Engine out

Oil pump rebuilt

Stripped and inspected bottom end

New clutch

New harmonic balancer (modified)

New gears and pulleys (modified)

New thermo fan setup

New complete hot side :)

and a $40 alternator lol

sounds normal to me Dave. :rofl:

We sorted the last major issue today which brought a smile to my face, then one of the oil cooler fittings WELDED to the cooler decided to explode. So off to Earls in the morning to see if I can get a new cooler under warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...