Jump to content
SAU Community

Recommended Posts

If I am bothered to, Ill fit mine back into my GTST and take pics. Its pretty straight forward. Pulling it out, its like a puzzle, it only comes out one way and you will figure it out. Installing it is the same, only really fits properly one way.

If I am bothered to, Ill fit mine back into my GTST and take pics. Its pretty straight forward. Pulling it out, its like a puzzle, it only comes out one way and you will figure it out. Installing it is the same, only really fits properly one way.

where can you get a shortshifter for an r33 these days, from what i saw on nengun , the c's shifter has discontinued, which leaves nismo which is bloody expensive

where can you get a shortshifter for an r33 these days, from what i saw on nengun , the c's shifter has discontinued, which leaves nismo which is bloody expensive

You want mine? $60 to your door. I took it out because its a noisy piece of shit. Yes I said it, short shifters are noisy pieces of shit. If you can't hear it you're deaf. Its a solid piece of metal and it can and will bring up all sorts of gearbox noise and vibrations. Done it on both of my cars. The throw is f**king awesome but I couldn't stand the noise... Oh and the excess wear it puts on your syncros. I think I could go from first to second gear faster than automatic.

BUMP.... Cant find anything useful on here or the interwebs... Someone?

i had to get longer bolts and when i did it installed fine.. its shorter and smoother than the original, im just have a slight trouble with the lever being a bit loose when its in gear it moves around a bit to much.

im gonna take it back out again when i have some time and see what could be the cause.

You want mine? $60 to your door. I took it out because its a noisy piece of shit. Yes I said it, short shifters are noisy pieces of shit. If you can't hear it you're deaf. Its a solid piece of metal and it can and will bring up all sorts of gearbox noise and vibrations. Done it on both of my cars. The throw is f**king awesome but I couldn't stand the noise... Oh and the excess wear it puts on your syncros. I think I could go from first to second gear faster than automatic.

what brand do you have, cause my bro has one in his and its very sweet and quiet, most likely put in when in japan as the whole car seems to be quite special with alot of quality improvements,

I got mine off ebay. It may be not the best... but it was not loud when i tested it...

The longer bolts seem it may be what i need, but i thing it extension cylinder needs to be shorter.

SargeRX8 would be awesome if you could do some pix, and if could measure the height of the extension cylinder for me that would be sick too.

  • 2 weeks later...
  • 2 weeks later...
  • 6 months later...

there should be two banana looking flat bits of metal with threaded holes that came with the short shifter kit. you need to put them in a groove on the actual gearbox and use the bolts to secure the shifter with square metal piece with 4 holes... not very technical i know, but unless u are missing some parts you should be able to fit it no problem. i did it on my r33 s2 gtst.

Hey man, new to this site but quick question, my short shift kit screws apart to put a new white gasket, I took the end cap off the stock one with a heat gun, then installed it on the new one, fits in nice c clip is in but my banana clips sit 3/4" below the big hole, the square piece doesnt sit exactly right on the hole so I looked and it also came with a metal riser but it def wont reach the banana clips, I dont think the square peice really holds anything. Can you please help!!!

Thanks

  • 1 month later...
  • 2 months later...
  • 11 months later...

Used this write-up to fit my Nismo shifter to my rb25 tranny, took about 20 minutes with a pair of snap ring pliers for installing/removing the first ring and a pair of needle nose pliers for removing and a pair of adjustable pliers for installing the second snap ring..

Thanks for the great how-to!

  • Like 1

Used this write-up to fit my Nismo shifter to my rb25 tranny, took about 20 minutes with a pair of snap ring pliers for installing/removing the first ring and a pair of needle nose pliers for removing and a pair of adjustable pliers for installing the second snap ring..

Thanks for the great how-to!

Sweet! Thanks! Its good to know after all these years it is still helpful. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...