Jump to content
SAU Community

Recommended Posts

Hey guys for those that may want to know.

We made 360awkw on 15 psi, and on 22 psi we made 450awkw.

I was told to bring the car back in a couple of weeks with some new fuel in it.

Then Jim will add some more boost and play with the cam timing as it was reset to zero.

Also I'll stick the 4"exhuast on and see what it makes.

The street exhaust is a 3"cat back.

The power curve is much bigger now and the rev limiter has also been upped to 9k.

Sorry no graph as i didn't bother printing one out as the car will be back there in a couple of weeks.

Also for the people who don't know the T88-33d has a smaller inducer than the T04Z (they are both rated at 750hp)

Jim also added the car should make over 500kw when tuned with more boost and the exhuast is fitted.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/210971-results-from-our-t88-setup/
Share on other sites

Hey guys for those that may want to know.

We made 360awkw on 15 psi, and on 22 psi we made 450awkw.

I was told to bring the car back in a couple of weeks with some new fuel in it.

Then Jim will add some more boost and play with the cam timing as it was reset to zero.

Also I'll stick the 4"exhuast on and see what it makes.

The street exhaust is a 3"cat back.

The power curve is much bigger now and the rev limiter has also been upped to 9k.

Sorry no graph as i didn't bother printing one out as the car will be back there in a couple of weeks.

Also for the people who don't know the T88-33d has a smaller inducer than the T04Z (they are both rated at 750hp)

Jim also added the car should make over 500kw when tuned with more boost and the exhuast is fitted.

Cheers

get jim to overlay our 460kw 20psi run-in graph (BP98) prior to Autosalon Newcastle then post up

response comparison would be interesting

looking good Ben

  • 3 weeks later...
Interesting indeed.

I had no idea there was a T88 with such a small inducer. Thats very decent power with 260/9.15's. Would be nuts.

Where are you going to get Jim to move the cam timing / power?

I was concerned that my poncams 260 would be restrictive at that power level. Im running a t0z (1.0 a/r) and hopefully 2bar to reach goal of 650hp atw. Should be back from machine shop next week so not to long to wait and see.

Interesting indeed.

I had no idea there was a T88 with such a small inducer. Thats very decent power with 260/9.15's. Would be nuts.

Where are you going to get Jim to move the cam timing / power?

I was concerned that my poncams 260 would be restrictive at that power level. Im running a t0z (1.0 a/r) and hopefully 2bar to reach goal of 650hp atw. Should be back from machine shop next week so not to long to wait and see.

Edited by drgnball34
I know of a certain stock capacity 26 on here that made almost 800rwhp with 260's....

"restrictive" is a relative term.

I agree...a stock rb26 head is capable of flowing almost 1000hp...yes stock cams, valve gear etc.

this lines up well with your example

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...