Jump to content
SAU Community

Recommended Posts

hey guys, i have an exedy hd cushioned button clutch which i got installed not too long ago. i also got the flywheel machined and a new thrust bearing.

the car's been alright for a while, and the clutch feels normal, but over the last couple weeks it's started to hiss at friction point (when the clutch touches the flywheel).

the clutch doesn't slip, or drive any different to when i got it installed. it drives the exact same.

what i did notice though is that it does shudder when i take off in 1st gear. i always thought it was because the clutch grabs really fast/well.

my mechanic says i've glazed my clutch or flywheel, but i don't ride on the clutch like an L plater would driving a manual car.

i was told that it would wear away after a while but it hasn't. the hiss is quite loud if you're standing outside the car.

what should i do in this situation? is my only option to get the flywheel re-machined?

your opinions...

Link to comment
https://www.sau.com.au/forums/topic/211179-glazed-clutch-need-helpopinions/
Share on other sites

All my clutches have hissed just as they start to engage. Even the old organic. :cheers:

Its normal.

My exedy 4puk solid button shudders less then the old xtreme 9puk.

Button = shudder if you try to ride them.

If you do ride them say good bye to it within 20,000km's.

I got 70,000km's out of my last ceramic 9puk but i would pop it when ever i could; avoid riding it.

All my clutches have hissed just as they start to engage. Even the old organic. :action-smiley-069:

Its normal.

My exedy 4puk solid button shudders less then the old xtreme 9puk.

Button = shudder if you try to ride them.

If you do ride them say good bye to it within 20,000km's.

I got 70,000km's out of my last ceramic 9puk but i would pop it when ever i could; avoid riding it.

thanks for all the replies guys. :D

thing is though Cubes, it never used to hiss up until not long ago. this is what i'm curious about, as it doesn't feel like it should be happening.

my clutch whines like a dying whale when I ride it to move around carparks and stuff...

starting making this noise when I let my friend borrow my car.. anyone got ideas as well?

Its a Unique Autosports Cushion Button clutch...

I could have the same problem as dmr

my clutch whines like a dying whale when I ride it to move around carparks and stuff...

starting making this noise when I let my friend borrow my car.. anyone got ideas as well?

Its a Unique Autosports Cushion Button clutch...

I could have the same problem as dmr

there's a big difference between a little hiss and a whine.. i know mine is hissing because of smooth metal contact, but yours could be something else. does it slip?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...