Jump to content
SAU Community

Recommended Posts

With the black Nur spec at the top of this page, do the extra items on the display screen only come with the nur? Can the extra data be put on a normal 34 gtr?

the standard bnr34s dont have the extras unlike the Vspec2 and the NURs ect ect.

if you want em u gotta buy the NISMO ver 2 MFD (~$900)

http://www.nengun.com/nismo/multi-fuction-display-version-ii

=]

  • Replies 210
  • Created
  • Last Reply

Top Posters In This Topic

My vspec has the same readings in that pic shown, however I bought the nismo mfd for the g force meter and lap timers as linked above. Cars in workshop atm so will be good to see it in action

correct me if im wrong but dosnt the G force sensor come with all bnr34s?

its only the inlet, exhaust temp, lap timer and a new boost sensor to read up to 3bar that are in the nismo units?

8f15_1.JPG

correct me if im wrong but dosnt the G force sensor come with all bnr34s?

its only the inlet, exhaust temp, lap timer and a new boost sensor to read up to 3bar that are in the nismo units?

8f15_1.JPG

The sensor exists but there is no readout on the MFD on any GT-R except those with the Nismo MFD.

  • 1 month later...
Only 19" can you get a lip like that on TE37's but the spokes are not as concaved like the 18's are.
yes they are the 19x10.5 all round.

I honestly prefer the look of the 19 over the 18s

thats my personal opinion

Yeah nice!

Cause I got 17" TE37 I do notice that its more concaved where as yours look stretched out with more lip. Deep lip FTW!

Same colour too, White. Hehe!!

post-46584-1214616361_thumb.jpg

pics of my car now with z-tune bonnet

car was not clean

Car looking very nice mate :D

Got some 19 x 10.5 LMGT4's coming myself - what size tyres are you running on the TE37's?

Any problems scrubbing etc? Is yours lowered from standard height?

Was hoping to fit 285/30/19's without too many issues

Car looking very nice mate :sick:

Got some 19 x 10.5 LMGT4's coming myself - what size tyres are you running on the TE37's?

Any problems scrubbing etc? Is yours lowered from standard height?

Was hoping to fit 285/30/19's without too many issues

Thanks mate.

Tyres are 275/30/19 all round

I was adviced not to fit the 285 as they scrub.

My car does scrub sometimes on full lock not all the time though.

It has been lowered about 1.5-2inches all round

The lowered rear wing the black one above looks funny but not bad and the front badge looks worst than original. Whyd he/she change it :D

The 19" TE37's look like the nismo rims on the M-Spec on the first page.

Black on Black Gloss TE37's will never get boring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...