Jump to content
SAU Community

Recommended Posts

yeah champ its the wiring that needs checked...... its more than likely whats called an "earth whine" which just means that the earth wire needs some attention.... but it wouldnt hurt to get all the wiring checked out as i have had some pretty big systems in my time and i know how annoying an earth whine and other engine sounds can be when u want ur system to sound crystal clear...... what brand of sub and amps are u running in there champ???? if ur interested in some clarion subs and amps pm me and ill send ya some pics and details of my gear..... its all basically brand new.... i have had the system for a while but have recently replaced the subs with new items of the same model purely becuz im a perfectionist lolz or if u wanna grab my msn off my profile and we can chat there about what u should do with the wiring situation

Cheers for the comments guys, but I can't take credit for it, I bought it with the stereo in it. The amps are Blitz, 1x1000w and 1x5000 which I'm pretty sure are cheap ebay items? And the subs are Sony 15" explod 3000w in custom boxes which he didn't line with any dampers, so that's a job for this weelend. Thanks for the offer of amps etc, but will stick with what I've got for a bit. Getting married next year (yeah I know,lol) so no $'s for luxury items at the moment. That's why I bought the skyline. last chance before I don't have 100% say in where my dollars go.

Thanks for the help too, will have a look over the whole wiring and see what I can find.

Skyline on!!!!

:rant:

post-48987-1207114711_thumb.jpg

Dude, have u tried to put in an inline filter which cancels the engine noise coming through your speakers? Goto jaycar or an audio specialist and they will provide you with a filter. Fixed all my mates problems when i got him the filter. Aint that hard to install aswell.

MR_XTC

Howdy,

cool, it already has a filter on it. So will check all the connections etc on the weekend. Hopefuuly that will fix it. Am just turning it up loud till then so I can't hear it,lol...

Cheers

post-48987-1207168668_thumb.jpg

Is this different to alternator whine?

I found this but I don't know who wrote it, someone on the internet:

"As mentioned earlier, I found a harness that runs in that bay-area, and behind the AC unit that has MASSIVE electrical interference. I could hold the rca's near it, and the whine was louder than the music (at mid-levels).

If you can't test it that way, then grab a 3.5mm stereo mini jack (same as your earphones) to RCA boot, and use the ipod plugged into them, so you're nowhere near the body.

If that is still noisy, change your RCA cable... use a short one to test with the ipod to the amp. Grab one out of your TV/DVD player and test with it. If the noise is still there, try and borrow a friends amp, and retest all of the above.

Turn your gains down on the amp. Put a massive earth on the battery.

OR use a Ground Loop Isolator from autobarn etc.

"

This article also talks about alternator whine:

http://www.skylinesaustralia.com/forums/Ca...dio-t94069.html

But your problem may be different....

EDIT: re-read your problem, it doesn't sound like alternator whine....but I don't know that much about car audio.

dude u need to ground the muthaf*#ka up

i had it b4 and made me crazy

the filter works a little bit but makes the quality shit

(reduces bass)

bcoz u runing sum high power gear

i sugest u double ground your equipment,

even add anotha ground coming from the batterie

should fix the problem

^^ english my friend - speak it?

go to your local audio store grab a ground loop isolator. it is a patch for the problem but in you case will be easy to implement.

  • 2 weeks later...
Is your power cable running up the same side as any of your RCA's? Having RCA's too close to power cable will cause this noise..

That's most likely the problem. Exactly what happened to me :thumbsup: But the RCA's going down one side of the car, and the power cable to the amp on the other.

Howdy,

I think they are, the guy who I bought it off put in the stereo and I don't think he was all there. Unfortunately I've been flat out with work for the last 2 weeks and haven't had a chance to dig too deep into this problem. I'm going to try and get onto it this weekend. Thanks for all the help, it's been invaluable. This site rocks!

Cheers to all!

post-48987-1208381922_thumb.jpg

hi, i had the same problem in my pulsar, i added all the off the shelf filters and stuff and it still was there, i tracked it down eventually to poor rca leads, which was the last thing i thought it could be but it turned out that the rca leads that came with the wiring kit were not properly shielded, that is the shield did nothing, it is supposed to connect from one device to another, i went out and bought a high quality set of rca leads and that ultimately fixed the problem. BEWARE OF DODGY RCA LEADS, EVEN IF THEY LOOK COOL.

The best investment any car enthusiest can make is a good quality multimeter, like from altronix or jaycar, mine cost me 10 bucks but potentially saved me hundreds by not having to take the car to a auto elec.

another thing you can try is getting a ferrite core from dick smith or jaycar etc and completing as many turns as possible of the speaker wire around it, this will eliminate most RF interference by not passing it into the speaker cable but allowing audio frequencies to pass.

dave.

When teh car is on ACC you dont here it but wen teh engine is on it starts to happen am I right?

I think you might have to connect RCA wires from the headunit to the amp. Similar problem I had but mine sounded like the turbo coming from my speakers?

I have a similar problem, but mine's caused by the grounding from the battery to the Chassis to the engine block.

I ran 4 guage power from the battery to the amps in the boot, ran speaker wires down the other side of the car, did all the rules, but got the noise.

When I placed another 4 guage wire on the negative of the battery, and to the chassis, the noise vanished straight away, so something to check before ripping all your stereo gear out is the basics, lift the bonnet, have a look at the negative wire, especially in the R32's, as mine's only slightly bigger than an 8 guage earth, completely inefficient for anything more than a stock headunit.

B.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...