Jump to content
SAU Community

Recommended Posts

r32line is only stating ONE of the points to tell the cars condtition just at a glance.

He's not saying Plenum paint = flaked off = f**ked engine...

Its just one of many things.

My plenum still had the paint on it just bits of it flaking off and no where near the condtition of the pics posted in J-Spec Imports.

I had to get new front disk, then rebuild my rear diff, then I rebuilt my turbos, then changed my clutch.

And it was a 90 model with 113 000kms.

But judging its a 93 model, 126 100kms on the clock and a plenum looking like that, you COULD say its been thrashed OR previous owner tried to get rid of the paint but did a shitty job...

Could be anything.

Best is to test the car itself.

BTW I was sent an email by Prestige Motorsport PTY LTD

This MIGHT be a cause of a low price car...

"Although it a R32 GTR, the price will not be HIGHLY affected but may have caused it to drop in price"

Please note that vehicle prices are way down thanks to the end of Japanese financial year plus current global economic uncertainty.

Most affected appear to be the more expensive vehicles, which is not that surprising since luxury items are always first affected in troubled times. Lancer EVO's, V35 Skylines and R34 GTR's are all considerably cheaper than they were just a few months ago, due to a sudden world decrease in demand and a coincident increase in supply due to the end of financial year stock clearances. Cheaper models are also being affected to some extent, although not as much as the models mentioned above which have dropped in price by many thousands of dollars. EVO 8's with low kms and in pristine grade 4.5 condition are down by about $6,000, and are selling from the low $30,000's complied, with higher km examples well under $30,000 complied. Some R34 GTR's have dropped by $10,000 over what they were selling for just months ago. V35's are also down by thousands.

With the exchange rate sitting at 93.99 Yen to the dollar today, we are right in the middle of a "perfect storm" of conditions which are creating the opportunity for massive cost savings on many import models, for those in a position to buy. It is hard to imagine cheaper prices at auction than we are seeing this last week or so.

There is no telling how long these conditions will last, so those in a position to take advantage of this unusual situation are encouraged to look at their options now if they want to pick themselves up a bargain.

Please note that your choice is not simply limited to what you see listed in our online stock sections. We have thousands of other vehicles to choose from at auction each week at amazing prices and we specialise in finding you the perfect vehicle to your exact requirements, including genuine low kms and non-smoker's vehicles. We have experienced buyers checking vehicles in person at auction so we can provide a level of detail that most others are simply unable to.

Our automated auction system sends vehicles of interest straight to your e-mail each morning, so it is extremely easy. You just tell us what you like each morning and we will take it from there.

If you'd like to see what is available just get in touch and let us know the model/s of interest, we'd be happy to add you to a free trial of our auction search system so you can judge for yourself, completely obligation free !

For our FAQ with answers to most questions please see: http://www.prestigemotorsport.com.au/modules/wffaq/

Edited by (00)SKYLINE(00)
BUT - If the plennum is chipped like the one in that photo the car is a POS NO QUESTION!! But don't take my word for it - Buy one like it and find out for yourself...

I had a GTR for three years that didn't have any paint on the plenum; it never missed a beat. Then again maybe the chipped paint is the reason an AFM broke right at the end. :(

Plenum paint = motor health is BS :bunny:

+1

I had a GTR for three years that didn't have any paint on the plenum; it never missed a beat. Then again maybe the chipped paint is the reason an AFM broke right at the end. :(

Plenum paint = motor health is BS :D

+1

Well thats conclusive proof then. Don't know why japanese writers of GTR magazine would say it is one of the good indicators of the engines life/history of treatment....Given it only comes off under extreme heat beyond normal use.... but what would they know....

Edited by r32line

Perhaps another cause of the paint coming off is going from -20degrees to 80degrees constantly in winter? I can't imagine paint would like that much.

The plenum is on the opposite side of the turbos so getting excessive heat under the engine bay is more likely to cause paint damage on the hot side.The logic is quite flawed.

The valve and timing covers are the same sort of alloy, one would expect them to lose more paint closer to the turbos.

If it's meant to indicate 'serious thrashing that leads to extreme heat beyond normal use' as you suggest. I have to say that I've never seen the paint come off the plenum at track days as an instant result of this.

The most obvious areas to look for 'over heating' are the oil and cooling systems or the things they bugger up when run to extreme temps. Like compression and cyl leakage.

You buy a car from japan this old and you take your chances. Given you can't walk up and test these motors, Plenum paint is the least of your worries and so this BS myth belongs in the bin as an old wives tale.

Well thats conclusive proof then. Don't know why japanese writers of GTR magazine would say it is one of the good indicators of the engines life/history of treatment....Given it only comes off under extreme heat beyond normal use.... but what would they know....

I'm sorry, I haven't explained myself properly. My experience (200,000km, 145psi, 18 year old RB26) IS conclusive proof that refutes your claim that "plennum [sic] is chipped ... the car is a POS NO QUESTION!!"

This myth has been busted.

I don't mean to put too fine a point on it, but rev210's excellent post shows how you should go with what makes sense and not what you read on the internet or in a magazine. Use the net/mags to give you a head start, but be wary of using them as an authoritative source.

lol totally agree hahaha, dont believe whats in the magazines :thumbsup:

last i checked (according to the magazines) the R32 GTR could only ever muster 280rwkw with stock fmic. and with that power, do a 12.1sec 1.4 ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...