Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

lol, there's no such thing as too cheap, if someones offering them to you for less you take them :laugh: and where is it? wonder if they do falken tyres :P

it was steve's wheels in sunshine (berkshire rd). preety sure they would do falkens. give them a buzz

Man, Tempe Tyres is so cheap! $260 each! If only they were in Vic or there was a place in Vic that had these prices.

In Vic the cheapest so far I've found is Steve's Wheels @ $319 each.

I just called them both. That's a $60 difference!

Tempe are probably so cheap because they sell so many so they buy in bulk. I bought wheels from tempe a few years ago and the shipping to get them down here was only $85. Might be worth buying them there and just getting them sent down, i'll go in with you, get 8 they might even do a better price.....

Tempe are probably so cheap because they sell so many so they buy in bulk. I bought wheels from tempe a few years ago and the shipping to get them down here was only $85. Might be worth buying them there and just getting them sent down, i'll go in with you, get 8 they might even do a better price.....

Yeah, unbelievable really. I told one place i rang up that they have to beat $260... the manager rings me back 5 mins later and says there's no way they can get even close, their *cost* price is $290 per tyre! That was Beaurepairs or something...

Anyway, i've ordered mine from the local Tyre Plus just up the road from work corner Ferntree Gully rd and Springvale rd. $320/ea. fitted and balanced. I only needed 2 for the fronts anyway. When you add up all the shipping costs and fitting and balancing by a local shop, it'll probably work out around the same.

the trick is tempe import direct from japan and skip the local distributor, just like nengun etc with other car parts. they have terrible service but excellent prices

That means they're parallel imported, right? So, no local warranty aside from the retailer warranty?

Bit of a worry if the tyre shits itself and puts you into a pole.

lol same argument for any import car....who would buy a car from nissan oz and pay them a cut for nothing?

and the tyre retailer still is required to warrant their goods under trade practices act. and they are the same tyres from the same factory.

Dont mean to jack the thread here, but seems you guys are paying way too much for tyres in those sizes 235/40/18 and 265/35/18,

i'll just say look at my thread before theyre gone :)

(dunlop direzza dz101)

:

THREAD

Dont mean to jack the thread here, but seems you guys are paying way too much for tyres in those sizes 235/40/18 and 265/35/18,

Were talking about falken tyres though, not the dunlop ones your selling....

  • 1 year later...

Sorry to revive an old thread but figured better than posting a new one-

How many kilometers did you get from your set of 452's? Assuming mostly daily driving with the occasional hills run or track day.

These or some KU31's look to be my next tyre... a google revealed some Mini owners loving KU31's

  • 2 months later...
how much are the FK452s in 285/35/18? I've got 285s on my car all round at the moment, but they're Sumitomo's (approx $390 to $400 per tire at that size)

I was going for smaller tires this time to hopefully get better performance/grip even though it's slightly slimmer tires.

I've got 2 x 285/35R18 Yokohama V103 in my shed you can have for $350ea

Just had some 452s fitted last weekend...

no offence but i have had more than one set of tyres that have been brand new and I've gone "wow these are great so much better than my old tyres". You have compared shiny new fresh rubber with no heat cycling to harden them, with old tyres that have had hundreds of heat cycles, no tread and old hard rubber.

The true test of a tyre IMO is what it feels like when it is half worn. I ignore anyone who gets new tyres and posts about how good they are. I'm currently running RE001 and they are decent, especially for the money. Better than the 3000A's I had on it before but I would like a bit more wet grip if possible. I may be asking a bit much :D The RE001s have lasted about 20,000km for me so far and they are half way gone.

Have only tried the 326's in Falken's range and they make a wooden wheel from a chariot look grippy.

I have been through 4 sets on FK452s already in 2 separate cars. Never let me down both in wear and grip. I like to stick to a good thing when I come across one so I think my opinion counts.

The Falken 326 were the bottom of the range made for taxi tires so I wouldnt use them even if you paid me to, so no comparison there.

no offence but i have had more than one set of tyres that have been brand new and I've gone "wow these are great so much better than my old tyres". You have compared shiny new fresh rubber with no heat cycling to harden them, with old tyres that have had hundreds of heat cycles, no tread and old hard rubber.

The true test of a tyre IMO is what it feels like when it is half worn. I ignore anyone who gets new tyres and posts about how good they are. I'm currently running RE001 and they are decent, especially for the money. Better than the 3000A's I had on it before but I would like a bit more wet grip if possible. I may be asking a bit much ;) The RE001s have lasted about 20,000km for me so far and they are half way gone.

Have only tried the 326's in Falken's range and they make a wooden wheel from a chariot look grippy.

Dude a couple of things:

A. You do realise that you are replying to a post from 2 years ago?!?! I'm guessing the dude has probably bought new tyres by now...

B. The Falken FK452 is a fantastic tyre that supplies a ton of grip, progressive breakaway, as well as good wear and low road noise, they are also unbeatable bang-for-buck when compared with the competiton

C. As you have admitted NEVER having driven on a set, I'd say you are in no position to comment

D. You are clearly a twat :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...