Jump to content
SAU Community

Recommended Posts

HAS ANYONE OUT THERE WITH A R34 GTT HAD ANY ISSUES FITTING THE HKS SSQ IN THE SAME SPOT THE FACTORY BOV IS?

MY TUNER MENTIONED ITS NOT A SIMPLE BOLT ON, EVEN WITH THE ADAPTER FLANGE. APPARENTLY HE NEEDS TO CUT HERE AND WELD THERE, HE IS STRONLGY RECOMENDING AGAINST PUTTING IT IN.

HAS ANYONE HAD PROBS FITTING?

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/213137-hks-ssq-bov-install-probs/
Share on other sites

HAS ANYONE OUT THERE WITH A R34 GTT HAD ANY ISSUES FITTING THE HKS SSQ IN THE SAME SPOT THE FACTORY BOV IS?

MY TUNER MENTIONED ITS NOT A SIMPLE BOLT ON, EVEN WITH THE ADAPTER FLANGE. APPARENTLY HE NEEDS TO CUT HERE AND WELD THERE, HE IS STRONLGY RECOMENDING AGAINST PUTTING IT IN.

HAS ANYONE HAD PROBS FITTING?

CHEERS

Ive got one fitted in my car, there's NO welding required, as it is a simply bolt on the factory pipe along with

the correct adapter plate attached.

DID IT GET IN THE WAY OF ANYTHING? APPARENTLY MINE IS? ALSO, I HAVE THE ADAPTER KIT TO FIT STRAIGHT ONTO MY ORIGINAL FLANGE,

DID YOU GUYS PLUMB IT BACK ?

Apparently yours is?? is that where you thinking, or is that what you've been told.

Post a pic mate, I didnt plumb back, it runs fine :/

MY TUNER MENTIONED HE WOULD PUT MY BOV ON FREE OF CHARGE AS LONG AS IT WAS SIMPLY A BOLT ON JOB AS I AM ALREADY PAYING 2,500.00 FOR A POWER FC, WALBRO PUMP + LABOUR.

HE RANG ME LAST NIGHT AND MENTIONED THAT IT WASNT GONNA BE AS SIMPLE AS BOLTING ON SINCE HE INSISTED WE PLUMB IT BACK. HE SAID THE BOV ITSELF HAD NO ROOM TO FIT AS A DIRECT REPLACEMENT FOR MY FACTORY BOV AND THE HKS PLUMB BACK EXTENSION WASNT LONG ENOUGH TO CONNECT WITH MY PIPE LEADING BACK TO THE ENGINE.

HE WAS PRETTY MUCH TELLING ME ITS WAS GOING TO NEED WELDING, FABRICATION, CUTTING, ETC. HE PRETTY MUCH TOLD ME TO FORGET ABOUT IT. I CANT FORGET ABOUT IT AS I HAVE JUST FORKED OUT ALMOST 400 BUCKS ON THIS BLOODY BOV AND I WANT IT ON MY FRIGGIN CAR.

IM NO MECHANIC BUT IS FITTING THE HKS BOV ON MY GTT SOMETHING I COULD DO MYSELF? I DID REPLACE MY FACTORY AIR FILTER WITH A POD FILTER MYSELF SO IF I WAS CAPABLE OF THAT SHOULD THE BOV BE SIMILAR IN FITTING?

THANKS BOYS.

as long as your engine bay is stockish then there should be no problem what so ever. There's the adaptor plate, the rubber o ring to go on the BOV and the little circlip that holds everything in place. 2 minute job putting it on. Pic of engine bay would help/.

ahh i think i see wat your trying to do mate. u want to plumb it back. DONT BOTHER. that is a bitch, and at the most all it would take is the plumb back adapter and maybe half a foot of 1'' rubber hose.

anyway. if u just block off the stock return pipe, and bolt on the ssq with the adapter. it will take about 15min. take out 2 bolts, take off stock bov. block return pipe. stick on bov with adapter and stick in the 2 bolts. thats it. i really dont see how its that difficult. i might suggest that your so called 'tuner' either doesnt know shit all. OR he has seen u coming a mile away. and would like to make a quick buck.

adapter shud look like this

http://cgi.ebay.com.au/Skyline-GTS-BOV-ada...bayphotohosting

Edited by r33cruiser

hey thanks for the info guys. I think R33Cruiser is on the same page as my "tuner", the plumbing back side is whats causing the apparent massive headache.

Either way we've given the BOV install a miss this time round, but when i get the car back tonight, i will have a look and try and swap my stock BOV with the HKS BOV. I do have the adapter you are referring to with the BOV.

but with blocking the return pipe, whats a good way to do this? as I will attempt to swap BOV's myself tonight.

Edited by CK34GT

Hey how r ya, Its really eas to install, no cutting or welding is needed, ur tuner probably thought it was the universial one, wot u need is an adapter! its just a simple bolt on, And you also have to block your plumback with a metal thingy.. mine came with it.. Tough sound but car doesnt run right unless u tune it, ur car will run rich and will stall sometimes.. that is just my 2cents from wot ive learnt.

Geraus.

CK34GT get a pic of your engine bay near your throttle body, its a freakn 10min job and shouldnt hard at all.

even if u wanna plumb it back it is easy as piss, as long as you have the plumb back adapter.

if you dont have anything and jsut the BOV, then yes its gonna be a pain.

if ur unsure like i said post a pic ive done it before

CK34GT get a pic of your engine bay near your throttle body, its a freakn 10min job and shouldnt hard at all.

SIF 10 min job.... dont tell him its 10 minutes, he starts to panic after 10 minutes....

i just install it yesterday.

YES i agree with you, theres a hose which is connected to your boost reading for the stock boost gauge in the car, u can just fit the ssqv in an angle around 30 degrees.

you do not need to fit it in horizontally, just give it a twist b4 installing it into the current position.

all you need is an adapter from ebay. works fine n quality is not bad.

Hi All,

Ok I got the car back last night. By the way the Power FC makes such a massive difference.

Anyways back on topic. I have taken a few snap shots of my engine bay as is and my new BOV accessories.

I have a pretty good idea what to do.

2002801899462616405_th.jpg

2002806121756749678_th.jpg

Any advise let me know what you think.

Thanks heaps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...