Jump to content
SAU Community

Recommended Posts

I was having a great Friday out with a mate tonight, and deciding to head to the Queens from Tigerlils we took Wellington Street where I was planning to go up Barrack St and all the way through to the bar.

Get to the light at Wellington / Barrack St, we're sitting behind a Ford Laser. This old dude (late 50s, early 60s) walks down the street, and then goes up to the Laser and has a talk to them. The dude walks off, then after he walks 4m down the passenger door of the Laser flies open and this dude with an already ripped up t-shirt (looks like he had a fight already) goes for the old dude. Fists start flying, and before you know it they've crash landed on the bonnet of my car.

The old man eventually falls to the ground, and then the dude starts laying into him. Two other guys from the car come out and then join in before they were called back in the car to make their get away.

My mate looks down and goes to me 'Man, we gotta help this dude. He looks like he's dead' . My mate can't get out of the car, coz the dude is right next to the door, so I get out and he comes through the same. I walk around and see the dude and he looks like he is dead. Blood everywhere, he wasn't moving. Call 000, however just as I called some Perth Security dudes had seen what had happened and were already on radio to the Police.

To cut a long story short, then we had to wait for some senior cops to arrive, then my mate and I taken to the station to make statements, then we walked back to the car to wait for Forensics to take some photos, and then what happens was just some ordinary cops came along with virtually the same happy snap camera that I had and took exactly the same shots. This took 4 hours of our time all of the above.

Later get home and notice heaps of dents on my 1/4 panel from when they crashed over the bonnet. Later this morning I'll probably wake up to find more damage than what I saw :D Got to wash all the blood splatter off my doors as well :S

Some of the pics from the night:

n852835178_2694685_2443.jpg

n852835178_2694683_1844.jpg

n852835178_2694687_3060.jpg

n852835178_2694689_3671.jpg

Edited by MattyP

Wtf is wrong with people these days. I got abused yesterday just for pulling up to the petrol bowser??????

Shame to hear about the car damage as well and I gues the old dude has survived.

Edited by taipan73

woke up this morning at 2am to hear a police chase behind my house. heard a massive bang so decided to get up and found that they had driven through a round about , straight into a 7 ft high brick wall. this wall was only fixed about a month ago from some 16yr old going for a joy ride in his parents car drunk and going through it too

Yeah my mate got a partial reading of plate, and within about 20minutes I'd say they nabbed the car. However I think the man dude that did the fight did a runner before the cops got to them.

To top the night off, go through a booze bus and dyke cop was not far from giving my car a yellow sticker. I was about to flip, esp after it took 4 hours to get my car back.

Thats f**ked, 3 people onto one old guy. Weak flamin mongrels, hopefully they do get whoever did it.

To top the night off, go through a booze bus and dyke cop was not far from giving my car a yellow sticker. I was about to flip, esp after it took 4 hours to get my car back.

Just saving lives mate. :)

Thats just stupid. Just pple looking for a fight, and obviously they found one! Hope the f**kheads are caught, you cant go around beating up old men to make yourself feel tough. Especially if it takes 3 people for one weak old man who wasnt even fighting back for most of it.

Yeah my mate got a partial reading of plate, and within about 20minutes I'd say they nabbed the car. However I think the man dude that did the fight did a runner before the cops got to them.

To top the night off, go through a booze bus and dyke cop was not far from giving my car a yellow sticker. I was about to flip, esp after it took 4 hours to get my car back.

Sorry to hear man but that's the price of being a good human. Humans should be awarded a "get out $hit free" card when they doing a good deed...and in the old days they were

  • 2 weeks later...

I would of just bashed them all.... The 4 in the laser and the old guy as well for denting the car....

Then I would get back into my mad VL Turbo with Calais front end, Slap 2nd and smoke them up!!!!!!!!

cops would never get me aye, as the smoke from my 22"s would cover my personalised "SikKhent" Plates

This is f**ked up, I wish this would happen in front of me, so I could jack the f**kers!

  • 3 weeks later...
I would of just bashed them all.... The 4 in the laser and the old guy as well for denting the car....

Then I would get back into my mad VL Turbo with Calais front end, Slap 2nd and smoke them up!!!!!!!!

cops would never get me aye, as the smoke from my 22"s would cover my personalised "SikKhent" Plates

This is f**ked up, I wish this would happen in front of me, so I could jack the f**kers!

hahahahahahhaahhahaha.....*sigh*...hahahahahahaha

lol that gave me a giggle



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...