Jump to content
SAU Community

Recommended Posts

Another bit of FYI on rear R32 GTR calipers.

Tried the rears on last night and although the rotor fitted the caliper has totally a different mount....bit of shame as it looked to be an easy and cheap upgrade.

  • 6 months later...

bit more of an update....forgot to add this....you will need to machine off about 2mm of the hub.....don't worry it does not affect anything.....but if you don't do it it will rub against the rotor.

  • 3 weeks later...
The front Brembos off 350Z, V35 Skylines will fit without any mods at all. I trial fitted them when I took off my Brembos from the Zed.

The rears im not sure 100% but my guess is that it's possible.

For a good used complete set of Brembos, you're looking at about $2500-2800 including calipers, rotors and pads. Im considering upgrading the brakes next.

Did you ever confirm that the 350z rear brakes fitted the M35?

This is on my list of upgrades once I start working on the driveline.

  • 1 year later...
bit more of an update....forgot to add this....you will need to machine off about 2mm of the hub.....don't worry it does not affect anything.....but if you don't do it it will rub against the rotor.

I'm doing this atm with R33 GTST Calipers and R32 GTR discs. The bit you machined of the hub..you are refering to the rectangle protrusion on the alloy part of the hub?

The Banjo bolt that you linished 1mm from to fit the brake line...did you do that so it seats inside the caliper and seals? Or could I just use a couple of extra copper washers to space it out?

I'm doing this atm with R33 GTST Calipers and R32 GTR discs. The bit you machined of the hub..you are refering to the rectangle protrusion on the alloy part of the hub?

The Banjo bolt that you linished 1mm from to fit the brake line...did you do that so it seats inside the caliper and seals? Or could I just use a couple of extra copper washers to space it out?

Fit the rotors up....you will see where it hits......thats the area you need to remove. As far as the calliper goes I wouldn't use extra washers.....if you look inside the calliper where the banjo goes in there's a small restrictor.....you should be able to remove it by screwing a self tappers into it and pulling it out.

if you get stuck give me a buzz

cheers

Craig

0406754304

Fit the rotors up....you will see where it hits......thats the area you need to remove. As far as the calliper goes I wouldn't use extra washers.....if you look inside the calliper where the banjo goes in there's a small restrictor.....you should be able to remove it by screwing a self tappers into it and pulling it out.

if you get stuck give me a buzz

cheers

Craig

0406754304

Thanks for the quick reply Craig! Whats the go with the restrictor in the stock calipers do I use that with the R33 calipers? Or do you mean remove the restrictor from the R32/R33 Calipers?..so the Banjo seats correctly? Am I on the right track?

Thanks for the quick reply Craig! Whats the go with the restrictor in the stock calipers do I use that with the R33 calipers? Or do you mean remove the restrictor from the R32/R33 Calipers?..so the Banjo seats correctly? Am I on the right track?

Yes, remove the restrictor in the R32/R33 calipers so that you can screw the standard M35 banjo straight in.

When you look into the point where the banjo screws in you will see the reducer just sitting in there. Comes out the the described method.

Otherwise you need to cut off the end of your banjo that has a restricting end.

Cheers

Andy

Yes, remove the restrictor in the R32/R33 calipers so that you can screw the standard M35 banjo straight in.

When you look into the point where the banjo screws in you will see the reducer just sitting in there. Comes out the the described method.

Otherwise you need to cut off the end of your banjo that has a restricting end.

Cheers

Andy

Got it!

So no need to linish 1mm off the Banjo bolt if I get the restrictor out?

Hi Jules

I do not know the size of the rotor but they are the same as the V35. The part numbers are the same. The brake pads are also the same as the V35/G35. (confirmed this with Ben).

I am looking at getting some Hawk brake pads from the US for front and rear. Just waiting to confirm the cost of rear pads.

Cheers

Andy

Hey Andy do you Know the (DB)code on the back brake pads and that of the service brake.Thanks Cad.

Hey Andy do you Know the (DB)code on the back brake pads and that of the service brake.Thanks Cad.

not sure what you mean by DB code? The Hawk brake code is HB30F.559 (rear)

It is unlikely you would need to replace the pads on the service brake. They can be tightened up with the wheel removed. There are instruction on how to do this in the G35 service manual.

Cheers

Andy

Brand new Gold Brembo's for 350z, brought 3 years ago but supposedly never fitted to a vehicle.

http://cgi.ebay.com.au/350z-Brembo-Brakes-...=item19bb209f05

Pick-up only and they are in Victoria.

I have R32 GTR disks and they foul on the hub arm. I would expect the R33 GTST 30mm will be ok. 32gtr is 32mm

I have the R32 GTR rotors on my M35 and they fit perfectly.

I had to remove a small raised section on the lower side of the hub arm, about 2mm thick and the size of a regular dice.

I have the R32 GTR rotors on my M35 and they fit perfectly.

I had to remove a small raised section on the lower side of the hub arm, about 2mm thick and the size of a regular dice.

Yep, looks the same here. I'm going to finish mine off tomorrow...wooho!

Ok my supposed R33 Calipers turned out to be 300zx items suited to 280mm disc's so a real pain in the butt as I now have to get a refund and source some more. They were the finned type and the legs on the calipers were considerably shorted...my guess about 16mm 296-280.

Are the legs on the R33 GTST calipers definately the same lenth as 32 gtr?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...